Page 330 - Roberston & Sinclair Catalogue

Portable Power Tools
Laminate Trimming Impressive both on curves and straight lines.
The OFK 700 EQ is a multi-talent among edge trimmers because it makes easy work of trimming edges and surface projections, irrespective of whether the workpiece is large or small, or whether the edges are curved or straight. The quick heavy-duty detachable router table provides a stable surface area and secure guidance for the machine in any working position.
Highly effective dust extraction.
The OFK 700 extracts chips and dust in both a vertical or horizontal position with no trouble at all.
Exact to 1/10mm.
The routing depth can be adjusted in 1/10mm increments.
MMC electronics.
The MMC electronics quickly adapt the speed of the OFK 700 to the working material and keep it constant under lead.
plug-it.
Change machines with a turn of the wrist. Cable breaks will not hold you up for long. Simply replace the cable and continue your work.
MODEL
OFK 700 Laminate Trimmer
POWER
0o router table.
The 0o table is used where the 1.5o router table is not the ideal solution, eg. on covered or coated edges. This accessory is used to rout edges at right angles.
WEIGHT DESCRIPTION
2.0kg Systainer storage case.
1/4” collet chuck, dust extraction hood,
D19 x 16 edge cutter.
EMAIL sales@rands.co.nz WEB www.RandS.co.nz
1.5o router table.
The table on the OFK 700 is inclined 1.5o to prevent the surface of the workpiece from being damaged during routing work.
Moving contact pad.
Laminated plastic edges are extremely hard and normally the cutter is only partially used. The OFK 700 has a moving contact pad to exploit the full potential of the cutter blade.
Contact spring.
The contact spring compensates for unevenness on coarse edges (eg. chipboard) to prevent errors from being transferred to the router and therefore to the edge of the workpiece.
PART NO.
FES574452
720w PHONE 0800 866 546
9-61