Page 38 - Roberston & Sinclair Catalogue

Shank Type Tools
Solid Carbide Spirals
D
Series 3000
Single Edge Compression Spiral
Compression spirals are used extensively for cutting double sided laminates. These tools can also be used on natural woods where edge fuzzing is a problem with standard spiral tools. The single edge design allows for feed rates up to 450 inches per minute. This tool will leave a clean top and bottom edge cut.
L2 d L1 PART NO.
6.35 22 6.4 63.5 VOR3010
6.35 22 6.4 63.5 9.5 28.6 9.5 76 9.5 28.6 9.5 76
VOR3010L VOR3030 VOR3030L
12.7 25.4 12.7 76 VOR3035
12.7 34.9 12.7 89 VOR3052
12.7 34.9 12.7 89 VOR3052L
12.7 44.5 12.7 89 VOR3060
15.9 51 15.9 101 VOR3070 15.9 51 15.9 101 VOR3080
L= Left Hand Rotation
Series 3100
Two Flute Compression Spiral
Compression means the upcut and downcut spiral flutes compress the material being cut preventing chipping or fuzzing on the top and bottom of the cut. Our unique flute geometry allows the “Viper” to cut faster and longer than other compression spirals on the market today.It also allows for extended sharpening life with excellent performance throughout the tool’s useful life. Compression spirals are used extensively for cutting double sided laminates (melamine, vinyl, high pressure laminates, painted board, etc). This series of compression spirals is not recommended for cutting materials thinner than 5/8”.
D L2 d L1 RIGHT HAND PART NO LEFT HAND PART NO
6 25 6 64 VOR3180 --
8 28 8 64 VOR3122 --
10 35 10 76 VOR3145 --
12 35 12 76 VOR3155 --
6.4 22.2
9.5 28.5 12.7 25
12.7 34.9 12 25 12.7 44.5 12.7 50.8
6.4 64 VOR3110
9.5 76 VOR3130 12.7 76.2 VOR3135
12.7 89 VOR3152 12 76 VOR3154 12.7 89 VOR3160 12.7 101 VOR3162
VOR3110L VOR3130L VOR3135L
VOR3152L -- VOR3160L VOR3162L
16 50.4 16 101 19 41.3 19 101 19 50.8 19 101
VOR3170 VOR3179 VOR3180
VOR3170L -- VOR3180L
19 63.5 19 127 VOR3183 VOR3183L
KEY OD = Cutting Edge Diameter L2 = Cutting Edge Length (mm) Od = Shank Diameter (mm) L1 = Overall Length (mm)
All care has been taken to ensure information in this catalogue is accurate. However we reserve the right to make corrections without notification.
2-10