Page 41 - Roberston & Sinclair Catalogue

Shank Type Tools
Solid Carbide Spirals
D
Series 3200C
Three Flute Compression Spiral with Chipbreakers
Three flute compression design with the addition of chipbreakers which reduce fuzzing and scaling on plywoods and hardwoods while allowing for higher feed rates.
L2 d L1 PART NO.
9.5 28 9.5 76 VOR3230C
9.5 22 9.5 76 VOR3285C (m)
6.4 22 9.5 76 VOR3235C
9.5 22 9.5 76 VOR3289C (m)
12.7 35 12.7 89 VOR3252C
19 50.8 19 101 VOR3280C
(m) = 6.35mm upcut for mortise cuts or thin materials
please note: Tools with an (m) have chipbreakers ground in downcut flutes only
D
Series 3300
Four Flute Compression Spiral
Four Flutes up and four flutes down! These tools were manufactured for users who want to run at extremely high feed rates. Compression spirals are used extensively for cutting double sided laminates (melamine, vinyl, high pressure laminate, painted board, etc)
L2 d L1 PART NO.
HARDWOODS / PLYWOOD
12.7 25.4 12.7 76 VOR3335
12.7 25.4 12.7 76 VOR3389 (m)
12.7 35 12.7 88 VOR3352
12.7 40 12.7 88 VOR3390 (m)
12.7 44 12.7 88 VOR3360
19 51 19 101 VOR3380
(m) = 6.35mm upcut for mortise cuts or thin materials
KEY SEE DIAGRAM ON LEFT FOR DIMENSIONS EXAMPLE.
PHONE 0800 866 546 EMAIL sales@rands.co.nz WEB www.RandS.co.nz
2-13