Page 45 - Roberston & Sinclair Catalogue

Shank Type Tools
Solid Carbide Spirals
Series 3800
Solid Carbide V-Point Bit
These tools are designed for v-grooving or bevelling of natural wood, wood composites, laminated and veneered materials, plastics and solid surface. They are available in 60
and 90o included angles and are manufactured with a slight shear angle for chip removal.
D L2 d L1 ANGLE PART NO
WOOD LAMINATES/FOAM COMPOSITES
6.4 12.7 6.4 76 60o VOR3830
6.4 12.7 6.4 76 90o VOR3835 9.5 15.9 9.5 76 60o VOR3840
9.5 15.9 9.5 76 90o VOR3845
12.7 15.9 12.7 76 60o VOR3850
12.7 15.9 12.7 76 90o VOR3855
6 12 6 64 60o VOR3860
6 12 6 12 16 12 12 16 12
64 90o 76 60o 76 90o
VOR3865 VOR3870 VOR3875
Series 3800
Solid Carbide V-Point Bits with flat
Designed for cutting aluminium/plastic sandwich materials like Alucobond, Dibond, etc with a 90 degree angle and flat bottom and shear cut.
LARGE DIAMETER SMALL FLAT ANGLE DOC D L2 PART NO
12.7 2.38 90o 5.16 12.7 76 VOR3880
Series 3900
Solid Carbide Compression Door Bit
D L2
This door bit is favoured by customers cutting lock set and light openings on wood veneered and wood core doors using a CNC, point to point, or KVAL machine. This tool is designed to cleanly cut the top and bottom edge on all common wood door cores; from particle core, stave core, LVL core and even mineral core doors. Not for use in steel doors.
d L1 PART NO.
6 12 6 64 VOR3950
KEY SEE DIAGRAM ON LEFT FOR DIMENSIONS EXAMPLE.
PHONE 0800 866 546 EMAIL sales@rands.co.nz WEB www.RandS.co.nz
2-17