Page 66 - Roberston & Sinclair Catalogue

Shank Type Tools
Door Profiles
Series 8300
Insert Shaker Door Cutter
BODY DIA
DEPTH OF CUT
Two wing insert design with upshear angle can be used to quickly “rough out” the center panel area of a Shaker Style MDF Door. The user would then use
a series of smaller diameter tooling to “square up” the inside corners of the recessed panel area. Insert cutter sold separately or as a kit with the tools shown below.
d # WINGS PART NO
31.4 12.7 12.7 2 VOR8300
Kit #8310
Includes:
Insert Body - 8300
Box of 10 Replacement Inserts - 13276
1 - 3850 - 12.7mm 60 degree V -Groove Bit 1 - 3189 - 12.7mm Mortise Compression
2 - 1310 - 3.2mm Downcut
REPLACEMENT PARTS
13276 - Inserts (sold in boxes of 10) 67116 - Screws
7001W - Wrench
Series 8300
Solid Carbide Beading Profiles
This tool series can be used to create various sized “raised beads” by taking one pass on each side of the radius. The small diameter of the tool makes it very desirable for MDF doors.
SMALL DIA RADIUS d OAL PART NO
2.79 3.17 12.7 76 VOR3750
2.79 4.75 12.7 76 VOR3760
2.79 6.35 12.7 76 VOR3770
All care has been taken to ensure information in this catalogue is accurate. However we reserve the right to make corrections without notification.
2-38