Page 74 - Roberston & Sinclair Catalogue

Shank Type Tools
An ideal cutter where paten guides are arranged both top and bottom of the product. To achieve this, the cutter is manufactured with a bearing at each end. Two 50mm or 30mm reversible and replaceable are fitted to the cutter.
STRAIGHT ROUTER BITS
PROFILING AND DRILLING PANEL BITS 1/4 SHANK
Plunge router machines will make a clean starting hole with this cutter. A tungsten carbide tip is fitted into the end of the cutter for bottom cutting. Not suitable for aluminium.
FLUSH TRIM ROUTER BIT
OD L2
19.0 50 19.0 30
FLUSH TRIM ROUTER BIT
OD L2
19.0 30 19.0 50
Od
12.7 12.7
Od
12.7 12.7
PART NO.
LINRB19M8LRB+B LINRB19M8B+B
PART NO.
LINRB19M8B LINRB19M8BLR
PART NO.
LINRB19M8BINV LINRB19M8LRBINV
PART NO.
LINRB19M4B
PART NO.
LINRBCPB454
OD L2 Od
10.0 19 6.4 11.0 19 6.4 12.0 19 6.4 13.0 19 6.4 14.0 19 6.4 15 19 6.4 16 19 6.4 18 19 6.4 19 19 6.4 20 19 6.4
PART NO.
LIN10M4D LIN11M4D LIN12M4D LIN13M4D LIN14M4D LIN15M4D LIN16M4D LIN18M4D LIN19M4D LIN20M4D
L2
OD
od
PROFILING AND DRILLING PANEL BITS 12.7 SHANK
These cutters are fitted with extra hard tungsten carbide. They are ideal for high production on CNC machines. A tungsten carbide blade is fitted into the cutter end for fast drilling. The cutters are recommended for vinyl, melamine, particle and medium density boards. Not suitable for aluminium.
INVERTED FLUSH TRIM ROUTER BIT
OD L2 Od
9.5 19 12.7 10.0 19 12.7 11.0 32 12.7 12.0 32 12.7 12.7 25 12.7 12.7 32 12.7 12.7 37 12.7 12.7 50 12.7 13.0 32 12.7 14.0 32 12.7 15.0 32 12.7 16.0 32 12.7 16.0 37 12.7 16.0 50 12.7 16.0 57 12.7 16.0 63 12.7 18.0 32 12.7 18.0 50 12.7 18.0 57 12.7 19.0 32 12.7 20.0 32 12.7 22.0 32 12.7 25.0 32 12.7 25.5 32 12.7 28.5 32 12.7 32.0 32 12.7 38.0 32 12.7
PART NO.
LIN9.5M8D LIN10M8D LIN11M8D LIN12M8D LIN12.7M8SRD LIN12.7M8D LIN12.7M8MRD LIN12.7M8LRD LIN13M8D LIN14M8D LIN15M8D LIN16M8D LIN16M8MRD LIN16M8LRD LIN16M8LRXD LIN16M8LRXXD LIN18M8D LIN18M8LRD LIN18M8LRXD LIN19M8D LIN20M8D LIN22M8D LIN25M8D LIN25.4M8D LIN28.5M8D LIN32M8D LIN38M8D
OD L2
19.0 29 19.0 50
FLUSH TRIM ROUTER BIT
OD L2
19.0 12
Od
12.7 12.7
Od
6.4
BEVEL TRIM AND CHAMFER BIT
OD L2 Od
29.0 16 6.4
REPLACEMENT SCREWS & ACCESSORIES
Torx T1.5 screw driver with 4 x 4mm screws
PART NO: RBTORX15
All care has been taken to ensure information in this catalogue is accurate. However we reserve the right to make corrections without notification.
2-46