Page 81 - Roberston & Sinclair Catalogue

Shank Type Tools
Carbide Tipped Router Bits
CHAMFER AND ANGLE BITS
ACTUAL SIZE REFERENCE
ACTUAL SIZE REFERENCE
LARGE DIA RAISED PANEL BIT
Four various diameters of angle cutters for raised panel doors. All cutters have a 25° bevel. B13 bearing.
– 12,000 RPM maximum speed for LINCPB658C and
CHAMFERING BITS
This range of cutters produce a 45° bevel. A B13 bearing is fitted as standard, B9 bearing changes cutter for beading cuts. – 12,000 RPM maximum speed for LINCPB458X and
LINCPB658D.
DIA CUTTER HT SHK
41.0 14 12.7 50.0 17 12.7 62.0 21 12.7 90.0 30 12.7
CHAMFERING BITS
PART NO.
LINCPB658A LINCPB658B LINCPB658C LINCPB658D
LINCPB458XX.
DIA CUTTER HT SHK
15.0 16 6.4 15.0 16 12.7 25.0 30 12.7 35.0 37 12.7
PART NO.
LINCPB454 LINCPB458 LINCPB458X LINCPB458XX
ACTUAL SIZE REFERENCE
Various cutters for raised panels, bevel and decorative edges. A B9 bearing changes cutter to beading cuts. A B13 bearing is fitted as standard.
– For 90° included angle refer to chamfer bit LINCPB454.
An extensive range of nine graduated angles. For bevels, chamfers, raised panels and trimming. Use the router machine fence or roller guide.
CHAMFERING BITS WITHOUT BALL RACE
DIA CUTTER HT SHK
16.0 15 6.4 16.0 15 6.4 20.0 15 6.4 25.0 15 6.4 25.0 16 6.4 40.0 17 6.4 42.0 14 6.4 42.0 14 12.7 42.0 10 12.7
PART NO.
LINCPB74 LINCPB104 LINCPB154 LINCPB224 LINCPB304 LINCPB604 LINCPB704 LINCPB708 LINCPB808
DIA CUTTER HT SHK
16.0 15 6.4 25.0 16 6.4 32.0 16 6.4 40.0 17 6.4 42.0 17 6.4 32.0 16 12.7 42.0 14 12.7
PART NO.
LINC104 LINC304 LINC454 LINC604 LINC704 LINC458 LINC708
KEY OD = Cutting Edge Diameter L2 = Cutting Edge Length (mm) Od = Shank Diameter (mm) L1 = Overall Length (mm)
All care has been taken to ensure information in this catalogue is accurate. However we reserve the right to make corrections without notification.
2-53