Page 91 - Roberston & Sinclair Catalogue
P. 91

  Shank Type Tools
                             CLAS
Carbide Tipped Router Bits
CLASSICAL REGENCY & REEDING BITS
MITRE LOCK BITS
For some time the mitre lock joint has been a problem to accurately produce consistently. The difficulty is making a square joint, because one panel has to be machined flat and the other panel must be cut in the possibly unstable vertical position. This problem is now solved! Both panels are now able to be machined on the flat - where maintenance
of accuracy is assured. Note: It is recommended that a router table be used to assist in the accuracy of the cuts. ALL CUTS ARE PRODUCED WITH THE PANELS ON A HORIZ- ONTAL POSITION. Instructions are supplied.
     SICAL REGENCY &REEDING BITS
    EDGE FORM BITS WITH REGENCY FORM
A common profile used on the legs of small regency tables
 DIA CUTTER HT SHK
23 32 12.7 23 32 12.7
EDGE FORM BITS
PART NO
LINER80E LINER80EB
DIA
25 39 64
DESCRIPTION
Spare Miter Cutter Spare Groove Cutter
Spare Miter Cutter Spare Groove Cutter
Spare Miter Cutter Spare Groove Cutter
MATERIAL SIZE
9mm to 12mm 16mm to 22mm 22mm to 32mm
PART NO
LINML124SET LINML124
LIN3.2M4 LINML228SET LINML228
LIN6M8 LINML348SET LINML348 LIN6M8
                 HOW TO PRODUCE A MITRE LOCK JOINT
STEP 1
First 45° tongue is produced in panel “A” using Bit No 1.
STEP 2
Second 45° tongue is produced in Panel “B” using bit No 1 also.
STEP 3
The trench is produced in Panel “B” with Bit No 2. A strip of waste is produced.
STEP 4
Line up panel “A” tongue with trench in Panel “B” then join
     This cutter faces edges of material and forms top and bottom radius in one cut. The radius form blends away to accept variations of material thickness
DIA
29 29
CUTTER HT SHK
32 12.7 32 12.7
FORM HEIGHT
32 32
PART NO
LINER78 LINER78B
      EDGE FORM BITS WITH DOUBLE REED FORM
 Double reed form for wider mouldings on edges, legs and mantels
DIA
CUTTER HT
 23 11 25.4 16 29 26 23 11 25.4 16 29 26
SHK
12.7 12.7 12.7 12.7 12.7
12.7
PHONE 0800 866 546
PART NO
LINDR2M8 LINDR3M8 LINDR5M8 LINDR2M8B LINDR3M8B
     LINDR5M8B
EMAIL sales@rands.co.nz
WEB www.RandS.co.nz
  2-63
       






































   89   90   91   92   93