Page 134 - TORO PRODUCT CATALOGUE NOV_2019

Turbo-Plus® II Pressure Compensating Drip Emitters
Application
• Vineyards • Orchards
Pressure compensating emitter with a chemically inert silicon diaphragm to cater for undulating terrain or long lateral runs with maximum blockage resistance.
Features
• Available in 2.0, 4.0 and 8.0 Lph flow rates
• Recommended operating pressure range 100-300 kPa
• Turbulent flow path for blockage resistance and uniform water distribution
• High quality chemical resistant diaphragm
• Removable cap and diaphragm for system inspection
• 4 mm barbed inlet to reduce the risk of particle entry on start up
• Diaphragm seats on base to prevent backflow into the emitter
• Outlet baffle to deter entry of insects
• Cap stamped with nominal flow rate for easy identification
• 4mm tubing can be connected to the outlet for precise drip placement
• Construction:
- Cap - glass filled polypropylene - Diaphragm - silicone
- Base - ABS
Australian made pressure compensating emitter that reacts to changes in pressure to ensure an even flow.
Ordering Information
Code
Description
1014052
2 Lph Turbo-Plus II (Pressure Compensating)
1014054
4 Lph Turbo-Plus II (Pressure Compensating)
1014058
8 Lph Turbo-Plus II (Pressure Compensating)
Performance Data
Code
Nominal Flow (Lph)
Flow (Lph) vs Pressure (kPa)
Turbulent
Flow Path Dimensions Min. (mm)
100 kPa
150 kPa
200 kPa
250 kPa
300 kPa
1014052
2
1.97
2.04
2.05
2.02
1.95
0.6 x 0.6
1014054
4
3.96
3.88
3.99
4.09
4.15
0.6 x 0.7
1014058
8
7.59
7.83
7.92
8.09
8.12
1.2 x 0.7
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
124