Page 212 - TORO PRODUCT CATALOGUE NOV_2019
P. 212

 Decoder Cable Fuse Device (DCFD)
 Ordering Information
 Code
   Description
   270DCFD1L
 Single Decoder Cable Switching Device w/ Lightning Protection
 270DCFDL
   Two-way Decoder Cable Switching Device w/ Lightning Protection
   270DCFD3L
  Three-way (1 input & 3 output cables) w/ Lightning Protection
 Application
 Specifically designed as electrical isolation device for quick troubleshooting of damaged or non-functioning 2-Wire irrigation systems. Single or multiple sections of the electrical circuit can be disconnected or isolated by simply removing a fuse, without cutting wires or undoing splices/joints.
Features
• The isolation of circuit sections minimises electronic component failure
• Cap is unscrewed to access the fuses, the O-Ring Seal provides a waterproof capsule.
• Lighting protection models incorporate lightning arresters on the input and outputs wires.
• All wires are 0.91 m 14 AWG UF/TWU for direct burial and to allow the assembly to be brought above grade when troubleshooting and accessing the fuses.
• Standard 20-amp Mini Automotive fuses act as circuit switches when inserted (closed/on) or removed (open/off)
• Provides lightning protection when the electrical surges exceed 20-amp.
• For more sensitive circuit during a lightning strike, 5-amp fuses are included on the lightning protection models.
Decoder Cable Fuse Device Installation
Decoder Cable Fuse Devices should be strategically installed at the points where cables split in different directions and in long straight wire sections to isolate it in half for troubleshooting.
The typical Installation below shows locations where you would undo the splices when troubleshooting. The electrical circuit should be looked at as if it was a hydraulic system and the DCFDs are isolation valves.
       Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
 198








































































   210   211   212   213   214