Page 218 - TORO PRODUCT CATALOGUE NOV_2019

R Pump Start Relay
Application
A low power pump start relay or Landscape lighting relay. With a lockable, vandal and weather-resistant case, the Irritrol® SR-1 can be mounted indoors
or outdoors to provide reliable switching control for pumps or other electrical devices from the controller.
Features
• Electrical relays for both low voltage (24V AC) control switching and high voltage (240V AC) main power contacts
• Allows remote pump switching using 24V AC output from an irrigation controller’s master valve/pump start circuit
• Opens and closes main power contacts for pumps (1.5kW at 240V AC 1 Phase)
• Highly efficient 0.1 Amp operating requirement
Draws less holding power than most solenoid valves.
• Enclosed, weather-resistant case – indoor or outdoor mount
Electrical Specifications
• Contacts: Up to 1.5kW at 240V AC, 1 Phase (20A at 240V AC)
• Coil: 24V AC, 3VA (19V AC Min, 30V AC Max)
• Coil Draw: 0.1Amp
Dimensions
• 241 mm H x 159 mm W x 95 mm D
Ordering Information
Code
Description
SR-1
Richdel Pump start relay, 1.5kW, 240V AC single phase
Profile Plug-In Transformer
• Heavy duty black plastic case
• Will operate up to two solenoid valves simultaneously
• For indoor use or within water-proof enclosure only
• Direct plug-in to standard three pin 240VAC outlet
• IP20 Rating
• Input: 240VAC, 50Hz
• Output: 24VAC, 50Hz, 900mA. Max 22VA
• Casing Dimensions: 56 mm wide, 58 mm high, 84 mm long (excludes two pins)
• 1.8 metre long lead
Ordering Information
Code
Description
101PIT
Plug-In Transformer
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
204