Page 24 - TORO PRODUCT CATALOGUE NOV_2019

PrecisionTM Series Spray Nozzles cont. Time Savings
All PrecisionTM Series Spray Nozzles can be combined on
the same zone for greater design and installation flexibility, which equates to time savings on the job site. Whether a new installation or retrofit project, the comprehensive range of PrecisionTM nozzles meets the needs of any project and all models are available in Toro (Male) and Female threads.
Nine Arcs, Plus Side and Center Strips Available
5’-Red
8’-Green
10’-Blue 12’-Brown
15’-Black
4’ X15 4’ X 9’
SST
60° 90° 120° 150° 180° 210° 240° 270° 360° (Left Corner Strip) (Side Strip) (Right Corner Strip)
Specifications
Operating Specifications (with PCD)
• Radius: 1.2-4.6 m (5’-15’)
• Operating pressure range: 280-520 kPa (40-70 psi) • Recommended Pressure: 350 kPa (50 psi)
• Flow Rate: 0.2-10.1 Lpm
• Nozzle trajectory:
• 1.5 m (5’): 5°
• 2.4 m (8’): 10°
• 3.0 m (10’): 15°
• 3.7 m (12’): 20°
• 4.6 m (15’): 27°
• Corner and Side Strips: 20°
Additional Features
• Radius reduction 25% maximum
• Color coded for radius on top of the nozzle
• Precipitation rate - 25 mm/hour
• Maintains precipitation rate as radius is reduced up
to max of 25%
• Matched precipitation rate within radius families
• Matched precipitation rates between radius families
• Screen attached to nozzle for easy insertion into the spray
Side and Corner Strips Available
4’ X 15’ 4’ X 9’
4’ X 30’ 4’ X 18’
LCS
RCS
body
• Works on all spray bodies
Warranty
• Two years
Specifying Information—PrecisionTM Series Spray Nozzles
O-X-XXXX-XXXX-P
Nozzle
Thread
Radius
Arc
O
X
XXXX
XXX
O—25 mm (1”) Per Hour
T—Toro Male Threaded Nozzle
Blank—Female Threaded
Nozzle
5—1.5m(5’) 8— 2.4 m (8’) 10— 3.0 m (10’) 12— 3.7 m (12’) 15— 4.6 m (15’)
4X15—1.2mx4.6m (4’X15’)
4X30—1.2mx9.1m (4’X30’)
4X9—1.2mx2.7m (4’X9’)
4X18—1.2mx5.5m (4’X18’)
60—60° TT—240°
Q—90° TQ—270°
T—120° F—360° -Full Circle 150—150° LCS—Left Corner H—180° RCS—Right Corner 210—210° SST—Side Strip
Example: A female threaded PrecisionTM Series Spray with a spray radius of 3.7 m (12’) and a 90° arc would be specified as: O-12-QP Example 2: A male threaded PrecisionTM Series Spray with a spray radius of 3.0 m (10’) and a 180° arc would be specified as: O-T-10-HP
16
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443