Page 322 - TORO PRODUCT CATALOGUE NOV_2019

Media Filter Accessories
Hydraulic Charging Head Code: 101HCH
Used to filter the supply line to hydraulically operated solenoid valves.
• Port A is the high pressure port
• Port B is the low pressure port
• 20 mm MBSP inlet elbow
• 0-1000 kPa pressure gauge and 3 way brass valve
• 20 mm Plastic screen filter (150 mesh)
Pressure Differential Switch Code: A20DPK30-K, A20DPK15-K
Used to trigger filter flush cycle on a controller.
• Settable Differential range 0 to 200 kPa (A20DPK30-K), 0 to 100 kPa (A20DPK15-K).
• 1/8” NPTM ports
• Normally open or closed switch (user settable)
• Supplied with U shaped mounting bracket, two 1/8” FBSP x 8 mm tube connectors
PD Switch Bracket Code: 101PDBRAC
For use specifically to mount the PD switch to the stainless steel media manifold.
• Manufactured from 2 mm thick stainless steel
• 25 mm MBSP mounting thread
• 115 mm high, 63 mm wide
Filter Flush Controller Bracket Code: 101FFCP
Designed specifically to mount the 8 station filter flush controller and PD switch onto the stainless steel media manifold.
• Manufactured from 2 mm thick stainless steel
• Four pre-drilled holes to suit 101FFC8
• 292 mm wide, 259 mm high
• 25 mm MBSP mounting thread
• Mounting hole to suit Pressure Differential Switch
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
302