Page 180 - Gas Detection Systems Training Manual

1. Admin- This is a plain text field (up to 75 characters in length) that the Email Relay Server will either recognize as a distribution list to be further broken down into a set of duplicate emails it will relay out, or a single email address to be resolved by other servers on the internet. This contact is intended for those who regularly administer the Panel on site and want to be notified of alarm events generated by the panel on behalf of sensor conditions it manages. Example (“John.Doe@MyCompany.com”).
2. Low/Mid/High/Fault Alarm Buttons- These buttons when pressed toggle between “Yes” and “No”, indicating what panel alarm levels will generate an email for the Administrator Contact. Any time an alarm level reaches this alarm level(s) selected after the Email Notification system is properly configured and activated and enabled, and email will be sent. Any device or entire zone will trigger the email, which will identify the number of devices and zones in this condition or set of conditions. The list of triggers (these buttons) will be enumerated in the email sent so that the recipient is aware of what alarm(s) triggered the email. Example (High Alarm- Yes, Fault Alarm- Yes. This would trigger an alarm only when either a high gas alarm is triggered or a device fault is triggered).
3. Supervisors- Same as “Admin”, though it has its own set of triggers that can be configured, and a completely different email contact address or list name. This can be used for those considered to be local building/floor/system knowledgeable recipients/staff that would want to know and/or respond to email notifications.
4. Management- Same as “Admin”, though it has its own set of triggers that can be configured, and a completely different email contact address or list name. This can be used for this considered as management contacts.
5. Responders- Same as “Admin”, though it has its own set of triggers that can be configured, and a completely different email contact address or list name. This can be used for those considered to be Emergency First Responders.
Bottom Region: Screen Navigation and Configuration Save/Restore Buttons
A. Back Button- Shows a popup menu allowing the Panel Administrator to navigate back to the Main Screen, Email Server Setup Screen or exit the popup menu.
B. Save Email Lists - This button saves or re-saves the displayed information to a configuration file on the compact flash card mounted/inserted into the SEC 3500 panel. It will not save the file if a card is not present or other error condition exists. If the file does not exist, it will create it in the root of the Compact Flash card as “EMLIST.CFG”. NOTE: Saving the configuration is necessary to acknowledge that desired email lists and triggers are setup and
SEC 3500 Email Notification Basic Setup and Configuration Version 0.1 Draft
September, 2013
Page 12 of 16
Sensor Electronics Corporation
12730 Creek View Avenue Savage, Minnesota 55378 USA 1-800-285-3651