Page 250 - Gas Detection Systems Training Manual
P. 250
8.3.5.4 Auto Device Discovery- Supervisor Configuration Item
As shown above, the Auto Discovery feature can be enable or disabled. By pressing the button, it will toggle between “On” and “Off”. This feature when enabled, allows the HMI to automatically (in the background) periodically check for newly added devices to the SEC Modbus. If it finds a new device it recognizes, it will popup a “loading parameters” box and load all parameters from the device and add it to the HMI database and screens. By disabling the feature, devices are not automatically discovered- therefore a new device added must be discovered manually using the Manual Device detection screen as described in section 8.2.
Sensor Electronics Corporation 5500 Lincoln Drive Minneapolis, Minnesota 55436 September 29th, 2006
Page 66 of 66
952-938-9486
SEC 3500 OI Supervisor Operator’s Manual Version 2.1.0095
