Page 14 - Dickey-john Catalog

AGRICULTURE PARTS CATALOG IntelliAg® WSMT2
Planter
-0850 WSMT Harness without Servo APER (-0160 4 channel control harness without APER)
ISOBUS
46798013x
to cab system power harness at rear of tractor or to the implement bar for a pull behind
A 37-pin Dj planter row harness may be connected here
NOTE: 16 rows is the maximum number of seed sensors that can be connected to
the WSMT
467980850
46798014X
CAN Extension
to first WSMB on implement bar. Refer to page 17-18 for adding additional rows.
NOTE: -0850 is without Servo APER (application rate error) to be used with the -0160 control harness
CAN Terminator included in 4 channel Implement dust plug kit 467980630
467980160
NOTE: -0160 is 4 channel control harness without APER (application rate error)
3-pin WP
6-pin WP 2-pin WP
467980810S1 PDC-WSMT2
(3) 1-pin WP
(3) pin
WP (1) Hopper Level
Test Switch
Radar Cable
(1) Imp. Radar
SYSTEM LIMITS
Planter Seeding Control (seeds per acre). However, channels can be configured for drill seeding control (lbs/acre). Channels can be configured in any combination for planter control, drill control, granular or liquid control.
(4) Feedback Sensors
Liquid Flow Meter or Application Rate Sensor
HF Valve or
HD 4180TM
(1) Lift Switch
(2) Servo
(1) RPM
SENSORS/SWITCHES
1 Hopper Level
1 RPM Sensor or *Air Pressure 1 Lift Switch
1 Ground Speed Sensor
16 Seed Sensors
Application Rate Sensor and Couplers
or Electric Pump/ Motor Driver Harness
Liquid Servo
5001785 Rev G (202302)
9
* Requires 46798-0164 control harness, see illustration of control harnessing
for a planter/drill using the -0164 control harness and the -0850 WSMT harness.
Distributed By: Sensor-1 • 202 Main Street, Princeton, KS 66078 • 1-800-SENSOR-1