Page 13 - Price List AW

®
®
Corian® & Apollo® sinks (includes basket waste strainer)
Sink/Hob Mountings & Cutouts
Sink undermount £90
Sink overmount £78
Bowl/Sink Inlay (per metre) £43
Belfast Sink cut out (inc. drip groove) £148
Hob Cut-Out (including insulation tape)†† £104
Drainers (type)
A (1-5mm gradient) £62
B (1-5mm gradient) £62
C (1-5mm gradient) £62
D (3mm flat) £128
E (3mm flat) £128
F (flat with 3mm recess) £128
Undermounted Sinks available in Bone, Cameo White, Glacier White & Vanilla
802 £402
804 £571
805 £631
809 £419
850 £875
857 £298
859 £586
871 £886
873 £1019
881 £970
965° £543
966° £708
967° £425
969° £560
970° £673
R0 (square corners) prices available on request (Rosemary is only available in R0) ° 965, 966, 967, 969 & 970 sinks are now also available in Designer White
®
Apollo Urban Sinks R10s
(waste disposal units must be supported by a cradle)
U851s Single Bowl U853s Half Bowl
U871s Large Single Bowl U752s One & Half Bowl
Length
317mm
168mm 500mm
317mm 168mm
Width
413mm
352mm 413mm
413mm 352mm
Depth Price
175mm £713 150mm £575 210mm £804 175mm
Cat No. Description
150mm
£1134
The Urban sinks which have Corian® sides and a stainless steel base, are available in the colour of your choice to match or co-ordinate with your worksurface.
In order to avoid any colour variance between the top and the bowl, we suggest a bevel or moulded edge, if this is not specified, we will use our discretion as to which detail will be used.
Stainless steel bases can be susceptible to scratching.
There can be a slight variation in colour between sink and worktop. This is due to the material being thermoformed (heated and curved to a tight 10mm radius).
Mixa Sinks R60s
®
(waste disposal units must be supported by a cradle)
M900 £3,043
M813 £1,565
M751 £1,978
M410 £1,466
M872 £3,167
M809 £1,304
M600 £2,848
M871 £1,652
M778 £2,526
M452 £2,129
M853 £1,178
M767 £2,483
M451 £2,104
M451 £2,104
M752 £2,236
M450 £2,104
M1050 £3,167
Mixa® Sinks R10 (waste disposal units must be supported by a cradle)
M900 £3,619
M813 £1,884
M872 £3,829
M809 £1,604
M600 £3,322
M871 £1,992
M778 £3,284
M853 £1,406
M767 £3,226
M451 £2,413
M851 £1,799
M752 £2,508
M450 £2,413
M1050 £3,752
Other sinks are available, please ask our Retail Sales Department
# R60 sinks have a 60mm internal radius and are available in all but the following colours:
Clamshell, Lava Rock, Sagebrush, Aztec Gold, Sonora, Venaro White, Cinnabar which are only available in R10 or R0, Urban and Mixa Sinks are not available in disclaimer colours
Corian® & Trevino® bowls
Undermounted Bowls available in Bone, Cameo White, Glacier White & Vanilla
810 £309
815 £402
820 £455
831 £392
Trevino Bowls available in all Corian® colours
Band 0
Band 1
Band 2
Band 3
Band 4
Oval Bowl
£318
£343
£405
£433
£454
Round 400 Bowl
£318
£343
£406
£433
£454
Round 250 Bowl
£246
£266
£26
£333
£351
Vivari® Sit on Sinks & Bowls
contact sales@sheridan-uk.com for prices - download VIVARI® brochure from www.mcdmarketing.co.uk/Corian/corian_pdf/vivari_brochure.pdf
Other Items Band 0 Band 1 Band 2 Band 3 Band 4
Pastrymate/Hot Pan Platter
£65
£69
£76
£85
£88
Full Bowl Sink Lid
£128
£138
£151
£165
£175
Half Bowl Sink Lid
£75
£80
£85
£98
£105
Basket Strainer Waste £17 Set of 6 Stainless Steel Pan Rests (200, 300 & 400mm long) £101
Phone Charger £376 Extra Support Frame (powder coated steel) per sq. mtr £268 Care & Maintenance Kit £31
DuPontTM CORIAN®
Important points to note
Measuring up
• Corian® can expand as much as 1mm/mtr, so always allow
a gap of at least 3mm if for example, worktops are captive
between walls
• Splashbacks or upstands over 100mm high must have
a minimum gap from the face to the rear of the hob:
Electric 50mm/Gas 100mm
• Wherever possible joints in worktops should fall on a
carcass end, not in the middle, this gives added support
to a joint.
• Tolerance in Corian® solid surface is ±2mm
• Allow a min 50mm from the cutout to the front edge
• Allow min 120mm between heated cutouts (or 50mm sink cutouts)
• Plan the worktop layout to ensure joints don’t fall on or
within 100mm of cutouts.
• Stainless steel sink cut outs to manufacturer’s recommendations
• Standard overhang is 35mm from the carcass front (not the door)
• Overhangs in excess of 300mm should be supported
and worktop should be supported every 600mm
Hot Stuff
• Do not pour boiling hot water directly into solid surface
sinks, and where constant boiling hot water taps are fitted, please ensure they are not left running directly into solid surface sinks
• Heat producing appliances that sit beneath worktop, must have an aluminium foil membrane placed on the underside of worktop directly above the appliance
• Always use pan rests or trivets to avoid the risk of heat damage
• Ensure that pans used on gas hobs are of correct size
• Hob flanges need to sit on aluminium thermal insulation tape around the cut-out, to avoid conducting too much
heat and causing cracks in the worktop
Installation
• Plastering or tiling should be completed after installation • Corian® has a semi matt finish. Wiping the surface
clean will help build up a smoother patina, which helps
improve scratch and stain resistance.
• Regular use of your Care & Maintenance Kit should ensure that your worktops always looks good.
For further information Tel: 0845 618 2800 Fax: 0845 618 2824 sales@sheridan-uk.com www.sheridan-uk.com