Page 45 - Demo

8300 SYSTEM: OVERKOTE® PLUS NOVOLAC EPOXY
8300 System
OVERKOTE® PLUS S
Heavy-duty, 100% solids Novolac epoxy toppings and coatings stand up to the harshest chemicals in extreme industrial environments.
» The highest level of protection against the most corrosive industrial chemicals — even 98% sulfuric acid
» Easy to apply viscosity and one coat finish requires half the labor of a typical novolac epoxy
» Withstands steel-wheeled traffic and mechanical abuse
» Low odor for use in all regulated areas and VOC compliant — safe for people, products and processes
» OverKote® Plus tested in 350 chemicals for one year immersion
» Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities
VOC <100g/l COMPLIANT NATIONWIDE
RESISTANCE:
Chemical MILD Abrasion MILD Impact MILD Mechanical MILD
WELL SUITED FOR:
100 10
DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE:
DRY TIME: FOOT FULL
Concrete
Smooth
16 mils / coat
100 sq. ft. / gal. 60–80°F (15.5–27°C)
10 hours 48–72 hours
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
Moderate
Penetrating Prime
& SealTM Primer, Prime & Seal Primer
Rubber Squeegee and High-Quality 3/8” Nap Roller
Chemical processing, pulp & paper, food & beverage, secondary containment, tank farms, trench liners, sump lining, plating facilities and battery storage areas. Also used as a chemical resistant topcoat
For Color Swatches See Page 45
SQ. FT.
SEVERE SEVERE SEVERE SEVERE
HOURS
44