Page 104 - Lifting Gear Hire 2017 Catalog

Air Winches
20,000 Lbs. AW3 Model Speci cations
Model
AW3B-12AX1 AW3B-42AX1
Drum Width
12” 42”
Dimensions
B C D (in.) (in.) (in.)
32 27 35 62 57 65
E (in.)
53.78 83.78
Flange Dia. (in.)
35.25 35.25
Drum Dia. (in.)
16 16
Note: Dimensions are subject to change. Please contact factory for certified prints. Green shading reflects rental inventory.
Model AW3B-12AX1 (12” Drum Length) 7/8” Wire Rope Dia. @ 90 PSIG – Specifications
Layer No.
1 2 3 4 5 6 7 8 9 10 11
Capacity Accumulated (ft.) Capacity
(ft.)
56 56 61 117 66 184 71 255 76 331 81 413 86 499 91 591 97 687 102 789 107 895
Pitch Dia (in.)
16.9 18.4 19.9 21.4 22.9 24.5 26.0 27.5 29.0 30.5 32.0
Max Hp
Flange Clearance
Stall Line (lbs.)
56,320 51,676 47,739 44,360 41,428 38,859 36,590 34,572 32,764 31,136 29,662
Pull
Start Line (lbs.)
44,039 40,408 37,330 34,687 32,394 30,385 28,611 27,033 25,620 24,347 23,194
Pull
FPM AT F.S.
72 78 85 91 98 104 111 117 124 130 137
Line pull (lbs.) 36,899 33,856 31,277 29,063 27,142 25,459 23,972 22,650 21,466 20,399 19,434
Speed (fpm)
30.4 8.4 33.1 7.7 35.8 6.9 38.6 6.2 41.3 5.4 44.0 4.6 46.8 3.9 49.5 3.1 52.2 2.4 55.0 1.6 57.7 0.9
Rentals@RentLGH.com | Pulling Equipment
Green shading reflects rental inventory.
Model AW3B-42AX1 (42” Drum Length) 7/8” Wire Rope Dia. @ 90 PSIG – Specifications
Layer No.
1 2 3 4 5 6 7 8 9 10 11
Capacity Accumulated (ft.) Capacity
(ft.)
208 208 226 434 245 679 264 942 282 1,225 301 1,526 320 1,845 338 2,183 357 2,540 376 2,916 394 3,310
Pitch Dia (in.)
16.9 18.4 19.9 21.4 22.9 24.5 26.0 27.5 29.0 30.5 32.0
Max Hp
Flange Clearance
Stall Line (lbs.)
56,320 51,676 47,739 44,360 41,428 38,859 36,590 34,572 32,764 31,136 29,662
Pull
Start Line (lbs.)
44,039 40,408 37,330 34,687 32,394 30,385 28,611 27,033 25,620 24,347 23,194
Pull
FPM AT F.S.
72 78 85 91 98 104 111 117 124 130 137
Line pull (lbs.) 36,899 33,856 31,277 29,063 27,142 25,459 23,972 22,650 21,466 20,399 19,434
Speed (fpm)
30.4 8.4 33.1 7.7 35.8 6.9 38.6 6.2 41.3 5.4 44.0 4.6 46.8 3.9 49.5 3.1 52.2 2.4 55.0 1.6 57.7 0.9
Green shading reflects rental inventory.
Note: 7/8” wire rope should be used for pulling applications only; 1” wire rope should be used for overhead lifting.
ANSI B30.7 which requires a 1/2 inch flange clearance. Layer numbers 1 – 9 meet European standards requiring 2 1/2 diameters of flange clearance.
-
102
Lifting Gear Hire | 800.878.7305