Page 233 - Lifting Gear Hire 2017 Catalog

Modulift Spreader Beams
60 Ton CMOD 50 – Spreader Frame Speci cations
Load charts only to be used in conjunction with CMOD 50 User Instructions.
First pick the span required for your frame (e.g. 10’ x 28’) and the Sling Angle (we recommend 60° BSA where possible), then check the SWL via the appropriate table. Read the table by locating the lower span on the y axis of the chart and the larger on the x. The cell which you are referred to, will indicate the SWL for your chosen span. If your exact span is not noted in the table, then please round up or down to the values that will give you the lowest SWL (to ensure no overloads are applied). Please contact Lifting Gear Hire for con rmation on your SWL if required. SWL given in tons.
CMOD 50: SWL / tonnes @ 60° BSA
Table 2
CMOD 50: SWL / tonnes @ 45° BSA 32 36
36
34
31
28
25
22
19
16
13
10
38 31 34
36 30 31
34 29 28
33 27 25
32 26 22
30 25 19
29 25 16
28 24 13
27 23 10
26 23 75050 26 22 4 505050
18 22 18
60
60 60
606060
60606060
60 60 56 52 50 50 50 22
54 53 51 47 45 45 45 45 25
50
40 50 40 50 40 50 40 50 40 13 16
31 40 31 40 29 36 27 36 25 36 25 36 25 19 22
31 30 30 29 29 27 27 25 25 24 25 23 25 22 25 22 25 28
23 18 22 18 22 17 21 16 19 15 19 15 18 14 18 14 31 34
7 6060606060
4 606060606060
Span 4 7 10131619 (ft)
Assembled Frame:
28313436 Span4710 (ft)
www.RentLGH.com | Rigging Equipment
Lifting Gear Hire | 800.878.7305
231
45 54 44 53 42 51 40 47 38 45 36 43 34 42 34 41 33 41 32
25 21 31 24 19
17 16 15 14 14 13 13 12 12 12 36