Page 7 - Bohrer Hauptkatalog

Technical Information
AGSTD/AGSTDLS
AG Starting Drills
One Drill for Centering, Chamfering, and V Grooves
High Positioning Accuracy
0.05
-0.05
Drilling Condition Work Material
S50C 210HB
Tool
6.0 × 90 °
Depth
2.6 mm
-0.05
AGSTD
0.05
0.05
-0.05 0.05
11 150 150 600 600
1200 1200 1800 1800 2500 -0.05 2500
Competitor
Feed
80 mm/min 0.1 mm/rev
Cutting Fluid
Wet
Positioning accuracy of the AG Starting Drill stays within 0.02 mm even after drilling many holes and has great consistency over the long term.
Keen Cutting Edge
Shape of angle of tip is like a chisel so cutting edge is very strong with a large clearance angle for a keen cutting edge.
Chisel shaped tip
Wide Range of Applications
Introducing Long Shank Series
AGSTD
AGSTDLS
Deep drilling points, The Long Shank series was developed to reduce interference when drilling deep holes.
Cutting V grooves
For cutting V grooves in straight or curved lines on flat or curved surfaces.
Cutting V grooves
Cutting Speed
15 m/min 800 min-1
Centering
For pre-drilling for drills that have inconsistent bite and drilling holes on curved surfaces.
Centering on a curved Centering and chamfering surface at the same time
Chamfering
For chamfering holes or edges.
Chamfering
Chamfering edges
Chamfering large diameter holes
6