Page 134 - WareRite Catalog Sept 2023

2. Custom Countertop Design Notes
Layout charge: • When fabricating a top from a template made from someone other than WARERITE.
Base angled cabinets:
Proper information needed • Cabinet run
• Cabinet spec
• Amount of overhang
36” 36” 25” 25”
• When making a top out of square or unusual shapes.
Design Notes
36”
25 1/4”
36” x 36” is cabinet dimension — see attached spec. of cabinet. Overhang of countertop is 1”
Overhang of counter is 3/4”
See Cabinet spec. attached.
Cut back or bump out: When depth of countertop is “cut back” to a smaller depth or “bump out” to a larger depth. Proper information needed
• Cabinet run
• Cabinet spec
• Amount of overhang 22”
Cut Back
Bump Out
9”
25” 27”
Bullnose end: When the overhang dimension is 1/2 of the depth of the deck. Arc end: When the overhang dimension is less than 1/2 of the depth of the deck.
36” ARC
Bullnose
167”
36”
8”
6” 60”
Clip 1” AF (across face)
R=3” R=3”
R=3” Double Pad R=3”
42”
Seam
40 Industrial Drive | East Bridgewater, MA 02333 | P. 508-690-2145 | F. 508-690-2183 | www.warerite.com
3/2019 | P-PAGE 12