Page 25 - OmniBeaconUserGuide_GDVersion
P. 25
(1) Connect the eld harness to the OmniBeaconTM.
(2) Route the wires to the desired location in the control panel
and cut to length.
(3) Locate two - 1⁄4” Quick connectors and crimp to the Blue and Red wires.
(4) Connect the Red wire to the positive battery terminal.
(5) Connect the Blue wire to the negative battery terminal.
(6) Connect the Yellow wires to desired alarm power source (12v – 120v AC or DC).
(7) Connect the Mains power. Green/Yellow connects to earth ground, Black to Line Hot, White to Neutral.
25
