Page 15 - Huffman's Sales Catalog

LATHES
BENCH LATHES
#59955138
Bench lathes are used for light- to medium-duty work and are mounted onto a workbench or stand. They are capable of machining larger work than hobby lathes with swings of 9” to 13”
*Various Brands/Models available. Used tool room lathes available at HWMI.
GEARED HEAD LATHE
13” & 15” Diameter Swing, Geared Head
Fully-geared headstock with 12 spindle speeds from
40 - 2500 rpm; 13”, 16 spindle speeds from 25 - 2000 rpm
15”. A broad range of Feed and Thread selections are
available by using three selector levers and an 8-position
rotary dial. Precision Gamet spindle bearings
Cross slide runs along a dovetail guide. Bed wipers and an
apron mounted one-shot lubrication pump. The cast iron
apron is totally enclosed and splash bath lubricated.
Gap Bed with easy-to-remove bed blocks. 40” center
distances 13”, 50” center distances 15”. Equipped with
chuck guard, full splash guard and leadscrew cover.
Clutch drive, reverse leadscrew with spindle turning for faster thread cutting. Extra wide bed provides accuracy and minimal wear. A one year warranty and backed by the Clausing Service Center dedicated to support our customers with parts and service.
Swing (Decimal Inch)
14.0000
Distance Between Centers (Decimal Inch)
40.0000
Spindle Bore Diameter (Inch)
1-3/8
Spindle Bore Diameter (Decimal Inch)
1.3750
Swing Over Gap (Inch)
19
Swing Over Gap (Decimal Inch)
19.0000
Swing Over Cross Slide (Inch)
8
Swing Over Cross Slide (Decimal Inch)
8.0000
Gap Length (Decimal Inch)
8.0000
Bed Width (Decimal Inch)
7.3750
Spindle Nose Designation
D1-4
Spindle Taper Size
3MT
Number of Spindle Speeds
8
Min/Max Spindle Speed (RPM)
70.00/ 2000.00
Number of Inch Threads
40
Maximum Threads Per Inch
112
Min. Longitudinal Feed Per Rev. (Decimal Inch)
0.0036
Max. Longitudinal Feed Per Rev. (Decimal Inch)
0.0325
Min. Cross Feed Rate Per Revolution (Decimal Inch)
0.001200
Max. Cross Feed Rate Per Revolution (Decimal Inch)
0.0345
Tailstock Travel (Decimal Inch)
3.7500
Tailstock Taper Size
3MT
Horsepower (HP)
2.00
Voltage
230
HUFFMAN INDUSTRIAL SALES 319-372-7232 www.huffmanwelding.com