Page 137 - 2021-22 Auto Performance_Circle Track
P. 137
SUSPENSION
Lower Spring Cups
Steel spring cup has a 7" wide curved base that welds to the top of a 3" diameter rear end axle tube cre- O.D. racing springs. Commonly used to replace OE-style “pigtail” lower spring mount. Sold each.
ALL56124
ALL56123
Leaf Spring U-Bolt
ALL68344
1/2" diameter and is 10" long. Heat-treated steel bolt
is sold each.
U-Bolt Pads
Universal style
Top View
Part No.
ALL56124 ALL56123
Description
Standard Cup Lightweight Cup
diameter axle tubes
and leaf springs up to
2-1/2" wide using 1/2" U-bolt fasteners. Center alignment hole is 5/8" to accept most lowering blocks or spring bolts. 1/4" thick formed steel pads have a gusseted shock mount with a welded bung to accept 1/2" mounting hardware.
Part No. Description
ALL60037 LH Pad
Leaf Spring Slider Box
ALL60034
Leaf spring slider box replaces conven-
tional leaf spring shackles to enable effort-
less suspension movement and prevent binding.
Box may be welded or bolted directly to chassis, and includes two nylon bushings with spring mounting hardware. Fits 2-1/2" wide Chrysler type leaf springs.
Replacement Part
Part No. Description
ALL99055 Bushings, 2-Pack
Leaf Spring Slider Box
ALL60035
Replace rear leaf spring shackles with
Allstar’s leaf spring slider box. Bolt-in slider box with
roller bearing design eliminates leaf spring binding, freeing up car. Fits 2-1/2" wide Chrysler type leaf springs.
Leaf Spring Pad ALL56126
Steel pad welds to 3" diameter rear end axle
tube when mounting rear end to most leaf springs. Pad is 2-1/2"W by 5-3/4"L and has a 5/8" center pilot hole. Sold each.
Clamp-On Lower Spring Pad
ALL56127
- eter axle tubes. Pad measurements are the same as ALL56126. Sold each.
Aluminum Lowering Blocks
ALL60037
ALL60036
ALL60038
ALL60036
RH Pad
ALL60038
Dual Mount Pad
Easily adjust ride height on leaf spring cars. Standard and adjustable styles are available in extruded or billet aluminum. Blocks are 2-1/2"W x 5"L Sold each.
Part No.
Height
Pin Dia.
Extruded Aluminum
ALL56130
1"
9/16"
ALL56131
1-1/2"
9/16"
ALL56132
2"
9/16"
ALL56133
2-1/2"
9/16"
ALL56134
3"
9/16"
Billet Aluminum
ALL56060
3/4"
5/8"
ALL56061
1"
5/8"
ALL56062
1-1/2"
5/8"
ALL56063
2"
5/8"
ALL56064
2-1/2"
5/8"
ALL56065
3"
5/8"
ALL56136*
1-1/2" Adj.
5/8"
ALL56138*
2-1/2" Adj.
5/8"
TOOLS & PIT EQUIPMENT
ALL56131
ALL56136
ALL56065
*Pins on blocks can be adjusted 1-1/4" to the front or rear of center position.
Leaf Spring Shackles
6-hole brackets for mounting leaf springs are 9" L. x 2" W. and have 1/2" diameter holes spaced 1" on center. Package of 2.
Part No.
ALL60055 ALL60056
Tin Snips
Durable tin snips have offset
blades to keep hands clear of
metal while cutting. Non-slip jaws
cut through sheet aluminum and up to 18-
gauge low-carbon steel. Blade length 1-1/4", total tool length 9-1/4".
Description
Steel 1/4" Thick Aluminum 3/8" Thick
ALL60055 ALL60056
Punch and Flare Tools
edges. Unique tools can be used to punch
holes. Starting with a small center hole, the
at the same time.
Part No.
Description
Part No.
ALL11030 ALL11031
Description
Red, Left Hand Green, Right Hand
ALL11070
1-1/2" Dia.
ALL11072
1-3/4" Dia.
ALL11074
2" Dia.
ALL11075
2-1/2" Dia.
ALL11076
2-5/8" Dia.
ALL11078
3" Dia.
Sample Punch and Flare
TRACK
CIRCLE 2021-22
135
