Page 140 - 2021-22 Auto Performance_Circle Track

Replacement Parts
Part No.
Threaded Inserts
Description
TOOLS & PIT EQUIPMENT
Rivet Gun Adapter for Cordless Drill ALL18205 Adapter is for reversible cordless
drills and greatly speeds up the
installation of “blind” rivets commonly used when
building race car bodies. Tool is a real hand and time saver compared to hand-operated rivet guns and is designed for use with all rivets up to 3/16" including 3/16" aluminum mandrel rivets but not recommended for 3/16" steel mandrel rivets. Adapter includes nosepieces for installing 3/32", 1/8", 5/32", and 3/16" rivets.
Threaded Insert Tool Kit ALL19450 Tool works with a cordless drill to install a
threaded insert into a panel or bracket. In-
serts are helpful when the backside of the
panel is not easily accessible. Simply drill
the correct size hole, install the threaded insert onto the man- drel, then place the insert into the hole and tighten using any cordless drill. Once the insert is compressed, reverse the drill and remove the mandrel from the insert. Kit includes mandrel and nosepiece for 1/4"-20, 5/16"-18, and 3/8"-16 inserts, other sizes available separately. Threaded inserts sold separately.
Cleco Pliers ALL18220 Unique tool readily
installs and removes Cleco fasteners.
Pin-Type Cleco Fasteners
Cleco pins permit quick, easy installation and removal of

1/8" Dia. Pins
Part No. Description
ALL18223 25-Pack
3/16" Dia. Pins
ALL18222
10-Pack
ALL18224
100-Pack
Part No.
ALL18227
TECH TIP
Drill holes one drill size smaller than the Cleco pin size to

Clamp-Type Cleco Fastener
ALL18230
Use when drilling is not an option. Smooth throat prevents paint damage, and spring exerts strong clamp- ing pressure. Throat depth is 1" with a maximum clamping range of 1/2".
Description
25-Pack
ALL18226
10-Pack
ALL18228
100-Pack
ALL19452
Mandrel and Nosepiece for 8-32
ALL19453
Mandrel and Nosepiece for 10-24
ALL19454
Mandrel and Nosepiece for 10-32
ALL19455
Mandrel and Nosepiece for 1/4"-20
ALL19456
Mandrel and Nosepiece for 5/16"-18
ALL19457
Mandrel and Nosepiece for 3/8"-16
ALL19454
Steel inserts are helpful when the backside of the panel is not easily acces- sible. Inserts work great for frequently removed items including gauge panels, switch panels, access panels, and body panels, or when mounting items to trailer walls. Inserts are designed for instal- lation using insert tool ALL19450 with coordinating mandrel and nosepiece. Package of 10.
Quick-Turn Fastener Wrench
ALL19400

head fasteners and reduces the risk of body panel or fastener damage when using screwdrivers for loosening or tightening. Features a non-slip handle.
Quick-Turn Spring Adjuster ALL19405 This tool is a must when adjusting tension of quick-
turn springs. Simply turn knob on adjuster to evenly pull or push spring without kinking or breaking spring.
Transfer Punches
Used to mark quick-turn fastener locations. Place transfer punch in the initial hole in weld plate or body panel. Position the panel to be marked over top of punch and lightly tap with a hammer.
Part No.
Thread Size
Grip Range
Body Length (Before Comp.)
ALL19460
8-32
Up to .080"
.420"
ALL19461
10-24
Up to .130"
.475"
ALL19462
10-32
Up to .130"
.475"
ALL19463
1/4"-20
Up to .165"
.580"
ALL19465
5/16"-18
Up to .150"
.690"
ALL19467
3/8"-16
Up to .150"
.690"
Cleco Pin Fastener Kits
Cleco pins are reusable and easily make a temporary connection between pieces of sheet

work with thicknesses up to 1/4", kits include pliers and 10 pins.
Part No.
ALL19402 ALL19403
Description
For 5/16" Fasteners For 7/16" Fasteners
Part No.
ALL18221 ALL18225
Description
Kit with 1/8" Pins Kit with 3/16" Pins
Quick-Turn Spring Fixture
Accurately drill panels when installing quick turn fastener springs. Start with a 1/4" center hole and use springs. Size listed is spring center-to-center distance.
Part No. Description
ALL19407 Fixture for 1" Spring
ALL19407
ALL19406
Fixture for 3/4" Spring
ALL19408
Fixture for 1-3/8" Spring
138 TRACK
CIRCLE 2021-22