Page 167 - 2021-22 Auto Performance_Circle Track
P. 167
Transmission Coolers
Universal coolers
reduce operating
temperature of the
the transmission, and
provide better per-
formance. Use as a
stand-alone cooler or
as an auxiliary unit to
increase cooling capacity of a stock sys- when using a high-stall converter, or if the vehicle is used for towing. Coolers have hose, clamps, and mounting kit.
Pilot Bushing Install Tool ALL26115
bushings or bearings for manual trans-
missions including Muncie, Saginaw,
BorgWarner, T-10, and many other popular transmissions with .590" pilot shafts.
Extended Length Pilot Bushings
Use these extra-long bushings when
distance between engine and bellhousing
has increased due to use of mid-plates, rear motor mounts, or adapters. Bushings help maintain true
TRANSMISSION COMPONENTS
Part No.
ALL26112
Description
Bronze Bushing
ALL26114‡
Steel Roller Bearing Bushing (has a machined-in roller bearing to reduce friction and wear.)
Part No.
Overall Size
Core Size GVW
‡ Bearing is shipped dry. Apply a good quality, high-temp grease upon instal- lation.
Clutch Alignment Tools
Splined, high-impact plastic tools are helpful when aligning the - sion input shaft.
ALL26700
12" x 5"
9" x 5"
10,000 lb.
ALL26702
15" x 5"
12" x 5"
12,000 lb.
ALL26704
12" x 7.5"
9" x 7.5"
16,000 lb.
ALL26706
15" x 7.5"
12" x 7.5"
18,000 lb.
ALL26708
16" x 10"
12" x 10"
20,000 lb.
Flexplates
Part No.
ALL14290 ALL14292
Description
1-1/8" Dia, 10-Spline 1-1/8" Dia, 26-Spline
block Chevy engines. Gold iridite-plated,
are .035" thicker than stock and have
dual (10-3/4" and 11-1/2") converter bolt
ALL26845 plates have a 3-bolt metric con- welded on both sides.
ALL26800
Transmission Stand ALL10174
leaks during storage and
transport of many popular
transmissions. Multi-po-
sition stand also keeps
the transmission level and
clean during servicing. An
adjustable rear stabilizer bracket
can be moved fore and aft as well as
vertically to accommodate a variety of transmissions including Bert, Brinn, Muncie, Saginaw, Richmond, and many others. Overall dimensions 11" x 14" x 6".
Transmission Stand
ALL10175
Stand is designed to accept most three- and four-speed GM manual transmissions and also Bert/Brinn- to rear pad mount.
Bellhousing Dowel Pins
Description
Balanced
Stock Replacement SFI
SB Chevy 153-Tooth
Internally
ALL26835
ALL26830
SB Chevy 153-Tooth, 86-Up
Externally
ALL26836*
ALL26831*
SB/BB Chevy 168-Tooth
Internally
ALL26805
ALL26800
SB Chevy 168-Tooth, 86-Up
Externally
ALL26806
ALL26801
SB Chevy 400, 168-Tooth
Externally
ALL26815
ALL26810
BB Chevy 454, 168-Tooth
Externally
ALL26825
ALL26820
GM LS 3-Bolt, 168-Tooth
Internally
ALL26845†
ALL26840†
*Single 10-3/4" Torque Converter Bolt Pattern.
†Will not fit 1999-2000 6.0L applications with 0.400" extended crank flange originally equipped with flat flexplate and will not fit 4L80E transmissions.
Flywheel Locking Tool SB/BB Chevy ALL96426
-
wheel bolts, clutch/pressure plate bolts or cam gear bolts. Lock-
Steel dowel pins are approximately 1/2" lon-
ger than stock pins and are required when run-
ning an engine mid-plate, rear motor mounts,
or an aftermarket bellhousing. These extended
length pins also help with alignment when installing
Balancing Plate ALL26120
Part No.
ALL38150 ALL38152
TRACK
CIRCLE 2021-22
Description
Solid Pins Hollow Pins
ALL38152
165
