Page 393 - 2021-22 Auto Performance_Circle Track
P. 393
NEW!
DUNDB-30404-DRT
oil cooler is custom fabricated and
-
and Rear End Coolers
lubricants cool for faster shifts and
off the road.
Part No.
Dimensions
A B C
Fittings
DUN30110
11.00"
4.00"
2.00"
Two -8AN
DUN30115
11.00"
6.00"
2.00"
Two -8AN
DUN30120
11.00"
8.00"
2.00"
Two -10AN
DUN30216
14.75"
3.00"
3.00"
Two 1/2" FNPT
X TM
Fluidyne Oil-Air engine oil coolers
durability.
Note: Please see dimension and fitting locations below for more information. Dimension and Fitting Location
Heat Exchangers and Oil Coolers Tech Dimensions
listed do not
include inlet/
length and
Part No.
Description
Dimensions
A B
C
Weight Fittings lbs.
DUN30416
1-Pass
14.75"
6.25"
2.75"
Two -12AN, Two 1/2" NPT
6.5
DUN30417
2-Pass
14.75"
6.25"
2.75"
Two -12AN, One 1/2" NPT
6.5
DUN30616
1-Pass
14.75"
9.25"
3.00"
Two -12AN, Two 1/2" NPT
9.75
DUN30617
1-Pass
14.75"
9.25"
3.00"
Two -12AN, One 1/2" NPT
9.75
DUN30618
1-Pass
21.00"
5.875"
3.00"
Two -12AN, One -6AN, One 3/8" FNPT
12.0
Note: Please see dimension and fitting locations at right for more information.
NEW! FRDM6007-D347SR7
- Notes: Carburetor, flywheel/flexplate, starter, and exhaust headers not included. Horsepower/torque numbers were achieved using a 650 CFM 4bbl Holley car- buretor and open exhaust headers.
D347SR7 Specifications
Displacement ..................347 Cu. In.
Bore x Stroke ..................4.030" x 3.400" Horsepower.....................415 @ 6,000 RPM Torque, Ft./lbs. ................400 @ 4,900 RPM
Valve Lift ..........................528" Camshaft Duration..........226° @ .050" Valve Size........................2.020"/1.600" Compression Ratio..........10.0:1
NEW! FRDM6007-S347JR2
Notes: Carburetor, flywheel/flexplate, starter, and exhaust headers not included. Horsepower/torque numbers were achieved using a 500 CFM 2bbl Holley car- buretor and open exhaust headers.
S347JR2 Specifications
Displacement ..................347 Cu. In.
Bore x Stroke ..................4.030" x 3.400" Horsepower.....................350 @ 5,500 RPM Torque, Ft./lbs. ................400 @ 4,000 RPM
Valve Lift ..........................533" Camshaft Duration..........206° @ .050" Valve Size........................1.940"/1.540" Compression Ratio..........10.5:1
FRDM6010-BOSS302
block stronger than the original. The deck height is 8.2".
CIRCLE 2021-22 391 TRACK
