Page 40 - 2021-22 Auto Performance_Circle Track
P. 40
Late Model Radiator ALL30044
Aluminum dual-pass radiator
has 16"x28" overall dimen-
neck. The 1-3/4" bottom outlet
is welded 90° to the tank, not
angled, as these radiators typically
mount with the top leaned forward. Universal
top inlet design accepts 1-1/2" standard hose, 1-3/4" hose, -16 or near the top on the driver’s side to release possible air in the
Wall Mount Radiator Holder Kit
ALL12216
Brackets fasten to trailer wall and
hold radiator safely in place to avoid
damage during transport. Kit includes
two 29" long aluminum brackets with
adjustment holes at 2" increments and
wide. Adjustable arms are slotted for quick adjust- of radiator heights.
Radiator Fin Tool Kit
ALL10680
Hand-held tool straightens
in most radiators, coolers,
and air conditioning con-
densers. Repairing
through core, increasing cooling ability. Six
Upper Radiator Support Bracket ALL30120 Universal upper support bracket is preformed
to 2-1/2" thick) to keep radiator secured in saddle-style lower mounts. Steel bracket is .085" thick and has a 3/16" hole for riveting or bolting in place.
Radiator Honeycomb
ALL30158
1/2" thick honeycomb screen mounts to front of radiator to protect from rocks and debris. Secure directly to radiator using ALL30085 mounting kit, sold separately. 19" x 26".
Universal Mounting Kit ALL30085 Mounting kits are commonly used to mount
electric fans, oil coolers, transmission
coolers, or honeycomb screen directly
to a radiator. Kits include four 8" nylon
mounting bolts with washers, rubber spac-
er blocks, and retaining nuts. Bolts are pressed
Radiator Shaker Screen ALL30160 Commonly used on Dirt Late Mod-
els, universal shaker screen is mounted in front of the radiator on most dirt cars. Unit includes black powder coated aluminum frame, screen, 1/2" x 32" cross rod, springs and retaining clips. Frame dimen- sions are 17" tall and 25" wide.
Stainless Wire Screen
Use screen to protect radiators, oil coolers, or other items. Size referenced is the approxi- mate opening of the screen.
COOLING
Part No.
Description
5/64" (.025" Wire Diameter)
ALL22260
12" x 36"
ALL22262
36" x 36"
1/8" (.035" Wire Diameter)
ALL22265
12" x 36"
ALL22267
36" x 36"
ALL22268
36" x 48"
3/16" (.047" Wire Diameter)
ALL22270
12" x 36"
ALL22272
36" x 36"
ALL22273
36" x 48"
Radiator Caps
ALL30129
ALL30136
ALL30128
5/64"
1/8"
3/16"
Higher cooling system pressure raises the boiling point of
2-1/8" O.D. x 3/4" deep necks unless otherwise noted. Recovery system caps allow coolant to exit the cooling system into an the system cools, recovery system caps will draw coolant back in to keep the cooling system full. Non-recovery system caps allow coolant to exit the system, but do not draw coolant back into the system.
Part No.
Description
Pressure
*Non-Recovery Radiator Caps
ALL30134
Stant/Moto Rad Round
18-22 PSI
ALL30135
Stant/Moto Rad Round
21-25 PSI
ALL30128
Stant/Moto Rad Round
28-32 PSI
*Recovery System Radiator Caps
ALL30132
Stant/Moto Rad Round
16 PSI
ALL30133
Stant/Moto Rad Round with Lever
16 PSI
ALL30130
Stant/Moto Rad Round with Lever
18-22 PSI
ALL30137
Stant Octagon
21-25 PSI
ALL30131
Stant/Moto Rad Round with Lever
21-25 PSI
ALL30136
Round
22-24 PSI
ALL30129
Round
29-31 PSI
ALL30138
Stant Octagon
38-42 PSI
*Small Diameter Recovery System Radiator Caps
ALL30124
Stant/Moto Rad (32mm I.D., 16mm deep)
16 PSI
ALL30125
Stant/Moto Rad (32mm I.D., 16mm deep)
19-21 PSI
ALL30126
Stant/Moto Rad 32mm I.D., 16mm deep)
28-32 PSI
38 TRACK
CIRCLE 2021-22
*Warning: High-pressure radiator caps are made for use on race vehicles only. Do not use these caps on passenger vehicles with stock-type radiators. It is recommended to pressure test the complete cooling system to the max- imum level of pressure indicated on the cap. Failure to test cooling system to the proper pressure prior to installing the cap may result in damage to the cooling system and/or bodily injury.
