Page 45 - 2021-22 Auto Performance_Circle Track
P. 45
Hose Clamps
Heavy-duty all stainless steel clamps are easily tightened with a deep-slot hex-head screw. Superior to standard hardware within the range of hose O.D.
Billet aluminum bracket mounts most
chassis tubing and pivot to any angle. Tank mounting holes accept 1/4" fasteners and between 3-1/2" to 4" CTC.
COOLING
Part No.
Min Hose O.D.
Max Hose O.D.
2-Pack
ALL18330
1/4"
5/8"
ALL18332
1/2"
1-1/8"
ALL18334
1"
2"
ALL18336
1-5/16"
2-1/4"
ALL18338
1-9/16"
2-1/2"
ALL18340
1-5/8"
3-1/2"
ALL18342
2-5/8"
4-1/2"
10-Pack
ALL18330-10
1/4"
5/8"
ALL18332-10
1/2"
1-1/8"
ALL18334-10
1"
2"
ALL18336-10
1-5/16"
2-1/4"
ALL18338-10
1-9/16"
2-1/2"
Part No.
ALL14200 ALL14201
Description
Bracket for 1-1/2" Tubing Bracket for 1-3/4" Tubing
Power Grip Clamps
Gates Power Grip Clamps seal when heated
with a standard heat gun, forming a tight band
around standard rubber and silicone coolant
hoses to provide a secure connection, even under harsh race hoses and eliminate exposed sharp edges associated with stan- within the range of hose O.D. for best connection. Sold each.
ALL36112
Aluminum tank has a 3/8"NPT bung on the side
and a 1/2"NPT bung on the bottom that includes
used in many forms of competition and is mandated by most sanctioning bodies to prevent coolant from spilling on the racing surface.
Petcock ALL99030
Replacement petcock for Allstar breather and
engines. 1/4"NPT threads.
Part No.
Min Hose O.D.
Max Hose O.D.
Aluminum nozzle acts as a signal to the
driver to indicate a possible overheating
condition as the cooling system pushes
out water. Nozzle with threaded body mounts
in a body panel outside the drivers compartment and is avail-
ALL30250
1/2"
11/16"
ALL30251
11/16"
13/16"
ALL30252
13/16"
15/16"
ALL30253
15/16"
1-1/16"
ALL30254
1-1/16"
1-3/16"
ALL30255
1-3/16"
1-1/2"
ALL30256
1-1/2"
1-3/4"
ALL30257
1-3/4"
2"
ALL30258
2"
2-1/4"
Part No.
ALL30178 ALL30179
Description
Nozzle with 1/4" Barb Fitting Nozzle with -4AN Male Fitting
ALL30178
ALL30179
Note: Clamps are not designed for use with flammable liquids or fuel line connections.
Expansion Tanks
Aluminum expansion tanks are commonly
mounted as the highest point of the cooling system
radiator is not accessible. The 1/2"NPT bottom
low-pressure side of the cooling system and the
the engine to help release any air trapped in the system. Tanks
ALL99312
on most radiators, allowing connection to an over-
and accepts a 5/16" hose.
reinforced to help prevent kinking and is rated up to 50PSI. Size indicated is I.D. of hose.
Hose I.D.
5/16"
3' Length
ALL40353
25' Length
ALL40354
1/4"
ALL40350
ALL40351
3/8"
ALL40356
ALL40357
Part No.
Description
ALL36115
Tank with Attached Mounting Bracket 28-oz. Capacity with a 3/8"NPT Return Fitting
ALL36116
Tank with Separate Mounting Bracket 20-oz. Capacity with a 1/4"NPT Return Fitting
Plastic tanks have a one-quart capacity and help prevent coolant from spilling onto the ground. Tanks and have 1/4"-20 molded inserts for easy mounting.
Warning kit senses pressure
in the cooling system and
alerts driver of a problem when
coolant pressure drops below
4 PSI. In the event of coolant
loss (i.e. blown radiator hose), the temperature
gauge probe is no longer surrounded by coolant
to detect the engine temperature. This will lead to a false tem- perature gauge reading and major engine damage.
Part No.
ALL36154 ALL36155
Description
Tank with Drain Valve (Non-Recovery) Tank with 90° Fitting (Recovery)
Water Pressure Warning Kit
ALL80250
CIRCLE 2021-22 43 TRACK
