Page 466 - 2021-22 Auto Performance_Circle Track
P. 466
8° Caster/Camber Gauge
Redesigned Caster/Camber gauge features an expanded 8° range to meet the needs of modern camber settings. CNC-machined from billet aluminum and engineered for extreme accuracy. Gauge may be purchased separately, or com- plete with magnetic adapter that attaches to hub.
Quick-Release Canister Mount
Canister mount has a quick-release nylon strap to secure any remote canister from 1-1/2" to 3" dia.
Part No.
Description
JOE19410
Clamps to 1-1/4" Tubing
JOE19412
Clamps to 1-1/2" Tubing
JOE19414
Clamps to 1-3/4" Tubing
JOE19430
Canister Panel Mount
JOE19445
Replacement Strap
JOE19450
Replacement Pin
Part No.
JOE28209
Description
8° Caster Camber Gauge
JOE28210
8° Caster Camber Gauge with Magnetic Adapter
JOE28295
Rigid billet bump steer gauge
is engineered to offer accurate,
consistent results. Digital indicator
does the math and zeros quickly.
Billet aluminum hub plate features
precision laser etching for accurate
measurements, and works with
most hubs including 5x5, wide 5, 5x4.5, and snap cap. Breaks down for easy storage.
10" Wheel Stands
JOE29600
Aluminum 10" wheel stands allow sus- pension adjustments while the car rests on the wheels. Sold in sets of four.
Coil-Over Spanner Wrenches
Billet aluminum wrenches prevent knuckle injuries when adjusting coil-overs.
Portable Nitrogen Tank NEW! JOE32351 High-pressure portable nitro-
tires without the
worry of having
Tank measures
18" x 5" diame-
ter, holds 1,800
PSI and may be
transfer hose. Regulator may
be adjusted from 0-150 PSI and
includes a hose and safety coupler, allowing attachment of an air chuck or air tools.
Related Components
Part No.
Description
JOE32352
Nitrogen Tank Handle, Eases Carrying
JOE32352-H
48" Stainless Transfer Hose, Required for Filling Tank
Part No.
JOE33000 JOE33500
Description
Long Short
NOTE: Portable tank may be refilled from a larger tank with less than 1,800 PSI.
DryAir JOE32120
The most effective control for
humidity at the shop or at the
track. DryAir may be used with com-
pressed air or compressed nitrogen and
includes a special desiccant formula that has
the drying capacity of 2-1/2 times its weight. Very effective in high-humidity or low-temperature conditions.
Related Components
Part No. Description
Eases ball joint installation. Machined-steel, zinc-plated sockets accept a 1/2" drive ratchet
Designed for shocks with 1/2",
14mm, or 5/8" shafts, kit uses a spe-
cial tool and shims for quick installation
of bump stop shims. A quick push and the
shim snaps into place. Each kit includes case, bump stop wrench, and (4) each: 1/16", 1/8", 1/4", and 3/8" shims.
Part No. Description
JOE19496 Bump Stop Shim Kit, 1/2” and 14mm Shaft
Shock Workstation
Fixture secures body and shaft of a shock absorber to allow easier servic- ing. May be used in a vise or mounted permanently to a work bench or pit cart with the optional base.
Part No. Description
or breaker bar.
Part No.
Description
JOE40050
JOE32121
Re-Charge Kit for JOE32120 NEW!
JOE40050
Upper Ball Joint Socket
JOE40075
Lower Ball Joint Socket
Spindle Nut Socket JOE40000 Billet aluminum socket is gray anodized and
JOE19200
Shock Workstation
JOE19250
Shock Workstation Base Only
JOE19075
ShockWrench, Allows Penske Shock Disassembly/Assembly
JOE19300
Drip Cup, Catches Shock Oil When Rebuilding
464 TRACK
CIRCLE 2021-22
