Page 560 - 2021-22 Auto Performance_Circle Track
P. 560
Push-In Filtered Breather Kit
MOR68810
valve covers without welding.
breathers, chrome adapters, and valve cover grommets. For valve covers with 1.22" dia. openings.
Aluminum Breather Tanks
for use as breather tanks for dry sump systems, rear ends or transmissions. Tanks are 11-1/2" high bottom petcock drain.
Part No. Description
Breather Tanks
for use as engine, transmission, or rear end breather tanks. Tanks are 3-1/8" diameter x 10-1/2" tall (with breather) and include 2" tall, clamp-on breather. May be mounted using MOR63401 mounting bracket. Offered
Carburetor Spacers
MOR64930 MOR64943 MOR65015 MOR64970 MOR64996
Moroso offers open plenum and four-hole carburetor spacers in plastic, phenolic, wood, cast aluminum, and billet aluminum. Spacers increase plenum distance for improved fuel distribution and insulate the carburetor from the manifold. Stud installation -
Description
Plastic Part No.
Phenolic Part No.
Wood Part No.
Cast Aluminum Part No.
Billet Aluminum Part No.
4-Hole Spacer
1/2" Tall, 1.75" Bores
—
MOR64943
—
—
—
1" Tall, 1.75" Bores
MOR64930
—
—
—
MOR64996
2" Tall, 1.75" Bores
—
—
—
—
—
Open Spacer
1/2" Tall
—
—
MOR65015
—
MOR64985
1" Tall
MOR64940*
—
—
MOR64980
MOR64981
2" Tall
—
—
—
MOR64970
—
MOR85455
Breather Tank with Mounting Bracket, (2) 1/2” NPT Female Fittings NEW!
MOR85468
Breather Tank with Mounting Bracket, (2) -10AN Male Fittings NEW!
* IMCA-legal for crate engine class.
Part No.
Description
Carburetor Stud Kits
one end to allow easy nut installation.
four of
each: studs,
washers, and nuts.
Part No.
MOR85400
Breather Tank, -12AN Fitting
MOR85404
Breather Tank, -8AN Fitting
MOR85406
Breather Tank, -6AN Fitting
Racing Air Cleaners
include radiused air inlets for enhanced
-
Raised-bottom air cleaner is designed to clear tall throttle return spring brackets. Each air cleaner is sold complete with 3" tall element, mounting stud, and wing nut.
Description
MOR37950
5/16" x 1-3/8", Fits Carbs with 1/2" Flange Base
MOR37955
5/16" x 2", Fits Carbs with 1/2” Thick Spacer
MOR37960
5/16" x 2-1/2", Fits Carbs
with 1/2" Flange Base and 1/2" or 1" Spacer
MOR37961
5/16" x 3-1/2", Fits Carbs
with 1/2" Flange Base and 1-1/2" or 2" Spacer
Part No.
Reusable Filter Shield
MOR65947
cell foam and can be cleaned in the sink or washing machine. One per package.
Carburetor Cover MOR65802
Description
MOR65911
Flat Bottom Air Cleaner
MOR65913
Raised Bottom Air Cleaner
Throttle Stop for Holley Carbs
MOR65042
material out of the carburetor during transporta- tion and storage. Fits Holley, Edelbrock, Ther- moquad, and Quadrajet carbs with 5-1/8" dia.
Throttle stop for Holley 4150 style carbs pro- vides a strong, positive stop, and also prevents excessive side loading on the throttle shaft that can cause shaft bores to wear out. Stop is ad- justable and mounts to carb hold-down stud. Fits both 1:1 and progressive linkages. Made of 1/8"
Carburetor Linkage Bushing Set
MOR64920
Steel bushing set adapts 1/4" throttle stud to the 1/2" dia. hole found in the throt- tle linkage plate of most four-barrel carbs. Split bushing permits easy installation and
558 TRACK
CIRCLE 2021-22
