Page 65 - 2021-22 Auto Performance_Circle Track
P. 65
ENGINE
CT525 Motor Mounts
ALL38085
Steel mounts allow a CT525
crate or other LS-Series engine
in standard or 1" setback locations. Sold as a pair.
Ford Motor Mounts
Steel mounts have been updated and now
blocks. Sold in pairs.
Part No.
ALL38112 ALL38113
Description
Rear Motor Mounts Front Motor Mounts
Standard Chevy Front Motor Mounts
Mounts are designed for fabricated chassis or stock chassis that have fabricated motor mounts
attached to the frame. Solid-style mounts bolt in place of stock motor mounts on standard Chevy engines and feature a frame mounting hole that
is centered on the original mounting location. Frame mounting holes are designed for 1/2" applications. Sold each.
ALL38100
GM Motor Mount Kit
ALL38082
Bolt-in steel mounts for GM metric chassis bolt to crossmember and accept Allstar steel motor mounts (ALL38100). A “captured” 1/2"-13 nut eases engine installation. Sold in pairs.
Motor Mount Spacers
1-1/2" O.D. x 1/2" I.D. Use with pedestal style engine mounts. Sold each.
Part No.
ALL38100 ALL38098
Description
Steel Aluminum
Part No.
Description
ALL18620
1/4"
ALL18621
1/2"
ALL18622
1"
ALL18623
1-1/2"
ALL18624
2"
Offset Chevy Front Motor Mounts
Mounts are designed for fabri-
cated chassis or stock chassis
that have fabricated motor
mounts attached to the frame.
Solid-style mounts bolt in place
of stock motor mounts on
standard Chevy engines and
feature a frame mounting hole
that is offset to the original mounting location. Frame mounting in many applications. Sold in pairs.
High Vibration Motor Mount Spacer Kit (Big Bar Soft Spring Cars) ALL18626
Ever wonder what happens to many
race car components when you continually
bottom out your chassis? Spacers are made
from a unique material that won’t let your
engine vibrate around under normal conditions yet will give some when you bottom out, making life a little easier on your engine and driveline components. Spacers are 1/4" thick, 1-1/2" O.D. with a 1/2" hole. Set of two.
Chevy Solid Motor Mount
ALL38080
Solid motor mount is 1/4" thick steel and replaces stock Chevy rubber mount to eliminate torque loss and prevent engine movement. Sold each.
Chevy Motor Mount Pads
ALL38090
Steel pads are 1/4" thick and traditionally
used as shims to gain extra oil pan or header clearance. May also be used for building custom motor mounts or engine stands. Sold in pairs.
JIMMY TUCKER
ALL38109
Solid-style mounts bolt between the engine and trans- mission of most Chevy V8’s to create a middle support. Unwelded version allows tab to be installed in any location. Commonly used with solid front motor mounts. Extended bellhousing dowel pins recom- mended, extended pilot bearings or other spacers
Part No.
ALL38109
Description
2" Offset
ALL38108
1" Offset
ALL38110
3-3/8" Offset
Chevy Rear Motor Mounts
may be required.
Part No.
ALL38101 ALL38102
Description
Welded Unwelded Universal Kit
ALL38101
ALL38065
Chevy Raised Motor Mounts
Use these mounts to raise the engine in the chassis instead of spacers and longer bolts. Use when chang- ing from a dry sump to a wet sump engine or when extra clearance is required. 1" or 1-1/2" raised steel mounts are 1/4" thick and slotted for easy installa- tion. Mounts are sold each.
Part No.
Description
ALL38060
Front, Raised 1"
ALL38061
Front, Raised 1-1/2"
ALL38064
Rear, Raised 1"
ALL38065
Rear, Raised 1-1/2"
ALL38061
CIRCLE 2021-22 63 TRACK
