Page 760 - 2021-22 Auto Performance_Circle Track
P. 760
Three-Pedal Floor-Mount Pedal Assembly TIL72-803
Three-pedal assembly uses a high-
and pivot-mount master cylinder design. Forged
aluminum pedals include adjustable foot pads and anti-slip surfaces. Adjustable pedal ratios allow tuning the pedal to driver preference.
Underfoot Triple-Pedal Assembly
TIL72-616
Designed for applications with tight cockpits,
pedal assembly has a rear-facing master cylinder
design, allowing the pedals to be mounted further
forward for a greater range of driver seating posi-
tions. Assembly consists of forged aluminum pedals, aluminum frame, and a large, 7/16"-20 balance bar. May be used with Tilton throttle linkage kits.
Overhung Dual-Pedal, Triple-Cylinder Assembly TIL72-608
Designed for clutch and brake operation, du-
al-pedal assembly features aluminum pedals and a
lightweight aluminum frame with guide ramps that
reduce balance bar tipping, improving brake repeatability. Large, 7/16"-20 balance bar provides brake bias adjustment and offers a rigid pedal feel. Master cylinders not included.
Firewall-Mount Dual-Pedal,
Triple-Cylinder Assembly
TIL72-607
Firewall-mounted, dual-pedal assembly has a lightweight aluminum frame, large 7/16"-20 balance bar, and forged aluminum pedals. Accepts up to three master cylinders. Master cylinders not included.
Firewall-Mount Dual-Pedal/Pivot-Mount Triple-Cylinder Assembly TIL72-901
“gimbal type” 7/16"-20 balance bar eliminates the problems associated with rear brake bias migration. Assembly includes a billet aluminum pedal frame, billet aluminum clutch pedal, billet steel brake pedal, and 6.2:1, 5.5:1, or 4.7:1 pedal ratios. May be used with Firewall Plate Kit, which helps isolate the engine master cylinders, purchased separately.
Throttle Pedal Assembly
TIL72-615
Throttle pedal assembly is engineered to comple-
pedal assemblies, mounting onto existing framework of brake and clutch pedal assembly using TIL72-793. Includes forged aluminum pedal arm and frame.
Part No. Description
Balance Bars
Balancer Bars work better than rod
end-style bars. Heat-treated, rolled-
thread balance bars have 2-1/2" cen-
ter-to-center measurements and may
be adapted to certain pedals or used to
improve and update other manufacturer’s products.
Part No. Diameter Length Center-to-Center
Remote Brake Bias Adjusters
Adjusters mount on balance bar so driver
plastic adjustment knob and a vibra- tion-resistant, spring-loaded detent. Available for use with 3/8" or 7/16" diameter balance bars.
TIL72-250
3/8"-24
4.75"
2.50"
TIL72-260
7/16"-20
5.20"
2.50"
Part No.
TIL72-509
Description
Standard Model Brake Bias Adjuster, 3/8"-24 or 7/16"-20, Red Knob
TIL72-508
Standard Model Brake Bias Adjuster, 3/8"-24 or 7/16"-20, Yellow Knob
TIL72-560
Right Angle Coupler, Prevents Adjuster Cable from Interfering with Clutch/Throttle, 3/8"-24 Thread
73-Series High-Volume Integral Reservoir Master Cylinders
Die-cast aluminum master cylinders
integral reservoir with a large, 10-oz. capacity. Cylinders have a reliable seal/ piston and a 1/8" NPT outlet port that is shrouded underneath the reservoir to
Part No.
Description
TIL73-750
Master Cylinder, 3/4" Bore
TIL73-875
Master Cylinder, 7/8" Bore
TIL73-1000
Master Cylinder, 1" Bore
74-Series Long Master Cylinder Kits
master cylinder kits are
universal with side- or
easy interchange of
remote reservoir, and a
mounting bracket that
adapts large or small
reservoir to remote
mount. Each master
cylinder (5.6" long) kit
- id outlets and bleed screws, small (4.0-oz.) and large (10.7-oz.)
Description
Universal Master Cylinder Kit
Master Rebuild Cylinder Only Kit
5/8" Bore Master Cylinder
TIL74-625U
—
TIL74-625RK
7/10" Bore Master Cylinder
TIL74-700U
—
—
3/4" Bore Master Cylinder
TIL74-750U
TIL74-750
TIL74-750RK
13/16" Bore Master Cylinder
TIL74-812U
—
TIL74-812RK
7/8" Bore Master Cylinder
TIL74-875U
TIL74-875
TIL74-875RK
1" Bore Master Cylinder
TIL74-1000U
TIL74-1000
TIL74-1000RK
1-1/8" Bore Master Cylinder
TIL74-1125U
—
—
TIL72-793
Throttle Linkage System,
for 600- or 900-Series Floor-Mount, 3-Pedal Assemblies
TIL72-797
Throttle Cable Clevis Assembly,
Allows Throttle Cable Attachment to TIL72-793
758 TRACK
CIRCLE 2021-22
