Page 791 - 2021-22 Auto Performance_Circle Track
P. 791
GM "604" Crate Motor Carb Spacer NEW! WEHWM10604
Billet aluminum, 1/4" tall ported carb spac- er provides added plenum volume to "604" crate motors, increasing bottom end torque
Traction Tuning Carb Spacer System
Grand National Hub Socket
WEHWM265
Socket accepts a 1/2" drive ratchet.
Wheel Well Compass WEHWM295
removed, and allows marking the desired radius around
cutting radius for a truly professional appearance.
Interior Tin Tube Notcher
Notch interior tin quickly and easily. Available in 1-1/4", 1-1/2", and 1-3/4".
Part No. Description
Fuel Barrel Socket WEHWM233
Open 15, 30, and 55-gallon steel racing fuel drums
with ease. Billet steel socket accepts a 1" wrench.
Panhard Bar Climber Adjuster Wrench
WEHWM274
Narrow wrench allows for quick
purposes only and is not designed to tighten or loosen the bolt.
Rear End Drain Pan
WEHWM330
Fully fabricated aluminum drain pan has
a provision to not only drain the rear end
lube, but also a spot to secure the rear
cover, cover nuts, and drain plug wrench.
Carb spacer system allows having
reduce power when traction goes away. Available in 1" or 2" tall versions, reduc- ers are offered in 1-1/4" with 4% reduc- 14% reduction.
WEHWM301-1.0
Part No.
Description
WEHWM301B
Spacer System Main Body, 1" Tall
WEHWM301-0
Open Insert for 1" Tall Spacer NEW!
WEHWM301-1.0
Bore Reduction Insert for 1" Tall Spacer, 1" Dia. NEW!
WEHWM301-1.125
Bore Reduction Insert for 1" Tall Spacer, 1.125" Dia.
NEW!
WEHWM301-1.250
Bore Reduction Insert for 1" Tall Spacer, 1.250" Dia.
NEW!
WEHWM301-1.450
Bore Reduction Insert for 1" Tall Spacer, 1.450" Dia.
NEW!
WEHWM302B
Spacer System Main Body, 2" Tall
WEHWM302-0
Open Insert
WEHWM302-1.0
Bore Reduction Insert, 1" Dia.
WEHWM302-1.125
Bore Reduction Insert, 1.125" Dia.
WEHWM302-1.250
Bore Reduction Insert, 1.250" Dia.
WEHWM302-1.300
Bore Reduction Insert, 1.300" Dia.
WEHWM302-1.350
Bore Reduction Insert, 1.350" Dia.
WEHWM302-1.400
Bore Reduction Insert, 1.400" Dia.
WEHWM302-1.450
Bore Reduction Insert, 1.450" Dia.
WEHWM2381250
1-1/4" Notcher
WEHWM238150
1-1/2" Notcher
WEHWM2381750
1-3/4" Notcher
Air Cleaner Nuts
Super-light nuts utilize an easy to grip design to allow easy installation or removal without the need for a wrench and are complete with an O-ring seal.
Part No.
Description
WEHWM27250
1/4" Nut
WEHWM273125
5/16" Nut
Suspension Set-Up Sticks WEHWM394 Set-up sticks
allow setting ride
or compression
height to set up
- able from 14"-24" for precise setting. Sold per pair.
Vice Grip Shrinker Tool
WEHWM409
Specialized tool is designed to pro-
Ball Joint Remover WEHWM130-2
apply pressure, and tap spindle to remove the ball joint.
Ball Joint Wrench WEHWM260 Install screw-in ball joints quickly and easily.
Suspension Load Pull Stick 7" NEW! Load stick bolts in place
of the shock on a shock
separate-type suspension,
allowing springs to be
changed with ease and
accuracy. Also allows pull-
ing the race car down to
-
sion bind. May also be used with the car
on jack stands to adjust compression loads. Choose from standard or ratcheting versions.
Part No. Description
WEHWM414-7
Load Pull Stick 7”
WEHWM414-7-R
Ratcheting Load Pull Stick 7”
TRACK
CIRCLE 2021-22
789
