Page 125 - 2022-23 Auto Performance Drag Racing

ing LED needle. Each
gauge includes a
0-5V analog output
for use with data
loggers or engine man-
agement systems. Sold complete with interchangeable silver and black bezels, black and white faceplates, wiring harness, and sensor.
volume fuel filter flows over 12 GPM @
45 PSI, yet filters contaminants as small
as 7 microns. Manufactured from billet 6061-T6 aluminum with a hard anodized black finish, filter has -10AN female ports.
High-Cap Universal Adjustable Fuel Pres- sure Regulator AEM25-305BK
The solution for racers that require a large volume of fuel delivery, high-capacity adjustable regulator provides 40-130 PSI
of adjustment. Compatible with gasoline
or alcohol, black anodized billet aluminum regulator includes return and outlet ports,
and an 1/8"NPT port for a fuel pressure gauge.
High-Output IGBT Inductive “Smart” Coil for GM LS1
AEM30-2853
The first ignition coil that combines
the benefits of high-output spark
energy and voltage with long spark
duration, required by vehicles using
high-compression, forced induction,
and/or nitrous-assisted engines.
The IGBT (Insulated Gate Bipolar
Transistor) “smart” coil is engi-
neered for use without an external igniter. Coils are com- pact, robust, and shockproof, allowing them to be mounted directly to the engine, if desired. Sold each.
4-Channel Coil Driver AEM30-2840 NEW!
The most effec-
tive and afford-
able method of
driving coils in
a coil-on-plug
ignition system,
AEM 4-channel
coil driver is de-
signed to drive
high-power,
dwell-controlled
two-wire coils found on most performance engines. May also be used as a replacement for a stock coil driver.
DRAG RACING
Digital Gauges
Compact, 2-1/16" diameter gauges combine exception- al accuracy and superior readability. Gauges fea- ture a bright, three-digit LED display and sweep-
Universal High-Volume Fuel Filter
AEM25-201BK NEW! Slim, 2" O.D. x 10" long high-
Part No.
AEM30-4401
Description
AEM30-4401
Oil/Fuel/Air Pressure Gauge, 0-100 PSI
AEM30-4402
Oil/Transmission/Water Temperature Gauge, 100°-300°F
AEM30-4406
Boost Gauge, 30-35 PSI
AEM30-4408
Boost Gauge, 30-50 PSI
High-Flow 320 LPH In-Tank Fuel Pump
AEM50-1000
High-flow, 320 LPH electric fuel
pump is capable of supporting
EFI applications with up to 1,000
horsepower @ 43 PSI. Designed for use with gasoline only, pump is 39mm in diameter and includes an offset inlet for easy, in-tank installation. Sold complete with rubber sleeve and end caps, pre-filter, hose, clamps, and flying lead.
High-Flow 380 LPH Fuel Pump
AEM50-1005
Well suited to naturally aspi-
rated or forced induction EFI
applications, high-flow electric
fuel pump may be installed
in-tank or externally mounted.
Pump flows a maximum of 380
LPH at 43 PSI, utilizing -10AN
inlet and -6AN outlet ports. Pump includes discharge fitting with check valve, terminal nuts and boots, and complete instructions.
High-Flow 340 LPH E-85 Compatible In-Tank Fuel Pump AEM50-1215 NEW!
Powerful, yet compact 39mm O.D. x 65mm long. in-tank pump
flows
340 LPH
at 40
PSI, well
suited to naturally-aspirated or forced induction applications. Pump is compatible with ethanol fuels up to E100, methanol fuels up to M100, and all types of gasoline. Sold complete with wiring harness, pre-filter, and O-rings.
Dan Gorby
123
2022-23