Page 255 - 2022-23 Auto Performance Drag Racing

Stainless Steel Rollerized Rocker Arms
DRAG RACING
Jumbo Split Lock 10° Valve Stem Keepers
Keepers provide twice the strength of conventional 7° tapers. Machined from premium chrome moly steel, heat treated for maximum strength, and offered in standard, .050" higher, or .050" lower installed heights. Keepers fit 11/32" valve stems. Sold in sets of 16 pairs.
Part No. Description
Billet Performance 7° Valve Stem Keepers
Machined from chrome moly and heat treated for maximum strength. Keepers fit 11/32" valve stems. Sold in sets of 16 pairs.
Part No. Description
Big Bearing Pinion Support CUECE-4031
Featuring a 50% larger bearing than the OEM
unit, Big Bearing Support delivers unsurpassed
durability. Sold complete with races.
NOTE: Requires CUECE-4044ND (1350 series), CUECE-4042FD (1310 series), or CUECE- 4042MD (1330 series) pinion yoke for installation.
Rocker arms are made of 17-4PH stainless steel, heat-treated and fitted with oversized needle bearings, sure-lock rocker nuts, and ball race steel tip rollers. Lightweight, narrow body rockers provide plenty of clearance when used with large di- ameter valve springs or high-lift camshafts. Sold in sets of 16.
Part No. Description Ratio Stud
Big Block Chevy Camshaft Thrust Button
CRO86086 NEW!
Nylon button installs on the end of the camshaft in big block Chevy engines, preventing excessive thrust and "camshaft walk".
NEW VENDOR
Centurion High-Strength 9" Housing and Axle Packages
Increase durability and versatility
with the installation of a direct-fit,
Ford 9" housing and axle package.
Ideal for mild drag race or street/
strip, Centurion notchback axle hous-
ings, which include 3" dia. axle tubes and
pre-welded, OEM-type bracketry, are sold complete
with 31-spline 1541 alloy axles, wheel studs, and Timken axle bearings. Housings are unfinished and ready to paint.
NOTES: Differential case with ring and pinion assembly and brakes must be purchased separately. Wheel studs are installed with the vehicle correct bolt pattern.
CRO73601-16
SB Chevy 265-400
1.5
7/16"
CRO73641-16
SB Chevy 265-400
1.6
7/16"
CRO73605-16
BB Chevy 396-454
1.7
7/16"
CRO73612-16
SB Ford 289-351W
1.6
7/16"
CRO86110-16
Standard Installed Height
CRO86110X1-16
+.050" Installed Height
CRO86110X2-16
-.050" Installed Height
CRO86107X1-16
+.050" Installed Height
CRO86107X2-16
-.050" Installed Height
CUECE-FDM6466X
Part No.
Heavy-Duty Track 9" Housing
Application
CUECE-2000NC
Limited Slip Differentials
Nodular iron, Ford 9" clutch-type differentials have Raybestos clutches and allow torque to
be applied through clutch function to limit wheel slippage. Requires 9-Plus Friction Modifier.
Part No. Description Large Bearing Housing Ends
Housing ends are for 3" O.D./2.62" I.D. axle tubes. Sold per pair.
CUECE-FDM6466X
1964-66 Ford Mustang
CUECE-FDM6770X
1967-70 Ford Mustang/Mercury Cougar
CUECE-GMA6466X
1964-66 GM "A" Body (Skylark/Chevelle/Cutlass/ Lemans)
CUECE-GMA6872X
1968-72 GM "A" Body (Skylark/Chevelle/Cutlass/ Lemans)
CUECE-GMG7887X
1978-88 GM "G" Body (Regal/Malibu/Cutlass/Lemans)
CUECE-5020
31-Spline Differential
CUECE-5012
Friction Modifier, 4-oz. Bottle
Heavy-duty, 9" Ford housing is made from
high-grade formed steel for wrinkle-free
construction. Housing weighs 25.8 lbs. and
accepts 3" O.D. tubes, which may be inserted up to 4". Slots have been machined in the housing to provide additional weld contact for added strength. Extra-thick housing can be welded without distortion. Purchase axle tubes separately.
Ford 9" Housing Accessories Part No.
Description
Part No.
Description
CUECE-5020
CUECE-2008LB
CUECE-7020
CUECE-2008LB
Early/Big Ford Style
CUECE-2008TB
Late/Torino Style
CUECE-7000C
Leaf Spring Pads, for 2" Springs, Pair
CUECE-7020
Shock Absorber Mounts, Universal, Pair
CUECE-9000E
Housing Studs, 3/8" x 1.75", 10-Pack, Use with CUECE-9007
CUECE-2012
Housing End T-Bolt, 3/8", Each
CUECE-8009
Housing Gasket, Heavy-Duty Material
CUECE-9007
Nut and Washer Package, 10-Pack, Nuts and Sealing Washers
Part No.
"Sportsman Case" CUECE-4026C
Description
CUECE-2000NC
Heavy-Duty Track 9" Housing
CUECE-2007D
Axle Tubes, 3" O.D. x .188" Wall, 21" Long for Rears Up to 63" Wide, Pair
CUECE-9905
Axle Tube Alignment Bar Fixture, Provides Accurate Axle Installation
Rear Brake Drum Kit CUECE-6005AD
High-strength nodular iron case is machined to stock specifications with a reinforced pinion bearing bore and extended strengthening ribs. Accepts carriers with 3.062" O.D. bearings. Ideal for mild racing applications.
Rear, 11" x 2-1/4" brake drum kit includes the
Aftermarket Brake Condition Standard (ABCS),
which consists of Torino housing ends, 2.500"
brake spacing, and a 2.800" brake register for
ease of interchangeability. Loaded assemblies are
complete with backing plates, wheel cylinders,
brake shoes, automatic adjusters, return springs, and brake drums with both 5 x 4-1/2" and 5 x 4-3/4" bolt patterns. Sold in pairs.
253
2022-23