Page 84 - 2022-23 Auto Performance Drag Racing

U-Joints
Steel Driveshafts
ALL69020
Performance U-joints are greasable and fit a variety of driveshaft combinations.
1310 Series: 3.218" Wide with 1.062" Diameter Caps 1330 Series: 3.622" Wide with 1.062" Diameter Caps 1350 Series: 3.622" Wide with 1.187" Diameter Caps
Driveshafts are built from 2-1/2" O.D. x .065" wall, D.O.M. steel tubing, balanced, painted white, and completely assembled with greaseable 1310 series (3-1/4") U-joints. Drive- shafts also include a popular 27-spline slip yoke to work with Powerglide, TH350, Bert, Brinn, and many other transmis- sions. Yoke measures 5.50" from U-joint centerline to end with 3.50" of slip length. Dimensions listed are from center to center of U-joints.
DRAG RACING
Rear Ends & Axles
U-Joints with Same Cross Width
Part No. Description
U-Joints with Different Cross Widths
Part No. Description
*Standard 1330 spread with larger 1.125" diameter caps.
U-Bolt Kits
U-bolt kits for 1310, 1330, and 1350 series U-joints secure drive- shaft to pinion yoke. Sold in pairs with nuts and lock washers.
†1330 with big caps (1.125")
GM U-Joint Strap Kit
ALL69014
Part No.
Slip Yokes
Description
ALL69030
1310 Series
ALL69031
1330 Series
ALL69032
1350 Series
ALL69019
29.5"
ALL69020
30.5"
ALL69022
31.5"
ALL69023
32"
ALL69024
32.5"
Related Parts
ALL69015
U-Bolt Kit
ALL69030
1310 U-Joint
ALL69034
1310 to 1330
ALL69037*
1310 to 1330
ALL69035
1310 to 1350
ALL69036
1330 to 1350
Width = B, Caps = A
Slip yokes provide an important link in today’s driveline and chassis combina-
tions. Yokes are available in standard
length for most street applications with minimal suspension travel to extra-long
for racing suspensions that have a radical amount of travel. 27-spline yokes accept 1310 style U-joints and are for use in many popular transmissions including TH350, TH700R4, Muncie and Saginaw 3 and 4 speeds, Bert and Brinn non-ball spline.
ALL69042 ALL69043
6-3/4" 4-3/4"
U-Bolt
U-Joint Series
Cap
Thread
“A”
Stud CTC “B”
Std.
ALL69015
1310/1330
1-1/16"
5/16"-24
1-3/4"
1.400"
X-Long
ALL69017
1310/1330
1-1/16"
5/16"-24
2"
1.400"
Std.
ALL69018
1330†
1-1/8"
5/16"-24
1-7/8"
1.575"
Std.
ALL69016
1350
1-3/16"
3/8"-24
2"
1.625"
82
Part No.
Description
ALL69040
29.5"
ALL69042
30.5"
ALL69044
31.5"
ALL69046
32"
ALL69048
32.5"
Hardened
ALL69043
6-3/4"
ALL69045
7-1/2"
ALL69047
8"
Replacement O.E. style U-joint strap
kit fits popular GM pinion yokes
including 7.5", 8.2", 8.5" 10-bolt
and other popular rear ends. Kit is designed
for 1-1/8" (1.125") diameter caps and includes
(2) 5/8" wide steel straps with 1-7/8" CTC holes and (4) 1-1/2" long 5/16"-24 grade eight bolts.
Ford 9" U-Joint Girdle Kit ALL69025
Aluminum U-joint girdles replace
standard steel U-bolts and provide
more surface clamping area for
1310 and 1330 (1-1/16") U-joint
caps. Girdle design helps prevent
over-tightening and includes mounting hardware.
Tailshaft Seal and Bushing
The tailshaft bushing is a regular
wear item, located inside the trans-
mission tailshaft housing. It should
be replaced when replacing the tailshaft
seal or when a driveshaft failure has occurred.
A worn bushing will cause excessive side-to-side
movement of the slip yoke and create a vibration or leak. Re- placement bushing and seal fits GM Powerglide, Turbo 350, Saginaw, Muncie, Bert, and Brinn transmissions.
Part No. Description
ALL72152
ALL72150
Seal
ALL72152
Seal with Bushing
2022-23