Page 170 - 2021-22 Auto Performance_Hot Rod and Early Muscle

Big Block Chevy, Reverse Rotation
EDE8854*
Ideal for street cars with after-
market serpentine belt pulleys. Includes heavy-duty 3/4" ball/ball bearing. Dimen-
sion from block surface to
hub: 5-3/4"
Chevy 348-409
EDE8858*
Fits 1958-65 348/409
engines and has a 5/8" shaft that relies on a 3/4" ball/ball bearing for smooth, trouble-free operation. The distance from the block surface to the hub is 5-1/2'.
Small Block Chrysler
EDE8877*
For 1969-1985 318-360-engines, it’s a
direct replacement for stock water pump
and will accept all factory pulleys and acces-
sories. Special cast-iron impeller and tight clearances - ant delivery. Pump has a 5/8" pilot shaft and heavy-duty ball/ball bearing and seal.
Big Block Chrysler
EDE8814*
Maximum cooling and performance for
361-440 engines, water pump is engi-
neered to directly replace the stock pump in the factory cast-iron housing, or work with the Mopar Performance aluminum housing. Includes 5/8" pilot shaft.
Small Block Ford EDE8841*, EDE88414
(EnduraShine)
Right-hand inlet with back plate. Dimension from casting to hub: 5.42". Fits 1965-68 289, 1968-69 302, 1969 351-W with 5/8" shaft.
EDE8843*
Left-hand inlet with back
plate. Dimension from casting
to hub: 5.70" Fits 1970-78 302
and 1970-87 351-W with 5/8" shaft.
EDE8844*
Left-hand inlet with no back
plate. Dimension from casting to hub is 5.71". Fits 1970-79 351-C and 351-M/400 with 5/8" pilot shaft.
*As cast natural stain finish.
Ford 5.0L Reverse Rotation EDE8840* (1986-93),
EDE8045* (1993-97) Fits 5.0L V8s using a ser-
pentine accessory drive belt. Reverse rotation; not for early model 289-302 V8s. Has heavy-duty 3/4" ball/roller bearing. Dimension from block surface to hub: 5-3/4".
429/460 Ford
EDE8866*
Left-hand inlet and no backing
plate. Accepts Ford backing
plate C8SZ-8508A. Fits all
1970-92 429/460 V8s in passen-
ger cars, trucks, vans, and motor
homes. Has heavy-duty 3/4" ball/
roller bearing. Dimension from block surface to hub is 5-1/2".
* As-cast natural satin finish. Ford “FE”
EDE8805*
Fits all 1965-76 Ford “FE”
V8s. Comes with heavy-duty
3/4" ball/ball bearing. Di- mension from block surface
to hub: 7.56" with 5/8" pilot shaft.
Pontiac
EDE8856*
Fits all 1969-79 389-455 cu. in.
with 11-bolt front timing cover with back plate. Has 3/4" ball/ball bearing. Dimension from block surface to hub: 4-1/2".
* As-cast natural satin finish.
High-Performance
Zinc Additive
Formula consists of zinc, phosphorous,
and moly to add wear protection for any engine including hot rods, muscle cars, and exotic sports cars. Ideal for cold starts and infrequently driven vehicles. Add with each oil change. Treats up to 6 quarts.
Part No.
Description
EDE1074
EDE1084
Quart
Case (12)
168
2021 HOT ROD AND EARLY MUSCLE