Page 469 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 469
1982-92 GM F-Body (Cont.)
Torque Arm Relocation Kits This transmission cross-member
with integrated torque arm mount
features the correct provisions for
mounting the TH350 transmission
while still allowing the use of a
factory-style torque arm. The built-
in torque arm mount will work with
virtually any stock-style aftermarket
torque arm as well as the factory
torque arm and features instant center adjustment by moving the front of the torque arm up or down.
UMI2230-B GM F-Body Torque, Black
UMI2230-R GM F-Body Torque, Red
1982-02 Camaro Short Antenna
UMI2996
-
1982-92 Boxed
Subframe Connectors The three piece weld-in
setup offers un-
matched strength
and offers ad-
ditional clearance
for dual exhaust
systems. May not
1982-92 GM F-Body
Transmission Mounted Torque Arms UMI2205-R
reduces wheel hop and improves 60-foot times. Sup-
clamshell mount.
Solid Motor Mounts
for 1982-92 GM F-Body NEW!
UMI90051
Solid motor mounts
decrease the unwanted
engine movement caused
by the factory rubber mo-
tor mounts, improving per-
formance and consistency. Solid mounts bolt directly to the frame, and must be used in conjunction with factory block-mount clamshells. Each mount is CNC laser cut from 3/16” mild steel, MIG welded, with 1” O.D. x 1/4” [inch marks] wall steel tubing, then black powder coated for corrosion resistance.
Lowering Spring Kit NEW!
UMI2461
Designed to lower third
generation F-body cars
approximately 1” – 1.5”,
these coil springs feature
a linear rate (600 lb/in
front, 200 lb/in rear) for
crisp handling and a better
provide the perfect blend of comfortable cruising and performance handling. Top-quality materials ensure con- sistent rates and stance for years to come.
1964-72 GM A-Body
LS Motor Mounts
UMI4008-R
-
lation of LS power
place the LS engine in
the factory SBC/BBC
location with the abil-
ity to move the engine
rear-ward up to 3/4"
and forward 1/4". LS mounts bolt directly to the frame
Part No.
Description
Part No.
Description
UMI2400-B
Black
UMI2400-R Red
Torque Relocation
Replacement Bushing
UMI3004
This bushing is required when the factory torque arm is used with the torque arm relocation kit.
Rear Torque Arm
Hardware Kit
UMI3003
8 bolts to accommodate the thicker torque arm mounting plates. In most cases the factory bolts are too short. Kit will not work on Moser 12-bolt.
2021 HOT ROD AND EARLY MUSCLE
467
