Page 51 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 51
Street Performance Chevy Mini-Starter
ALL80525
SB Chevy clockable starter has
twelve mounting positions and is a
good choice for street engines includ-
ing crate motors. Starter has 1.4kw
permanent magnet and weighs only 7.5 lbs.
Clears most kickout oil pans and works with 153-
- sion ratios up to 10.5:1.
Starter Solenoid
ALL76203
Ford-style solenoid is perfect for use with high-torque racing starters. Flat base eases mounting, and a remote under-hood starter switch or timing light hook-up can be easily adapted. Solenoid is offered separately, or may wiring, terminals, and hardware.
Solenoid Jumper Wires
Jumper wire completes the circuit to the
starter solenoid on the starter when using remote-mounted solenoids such
Part No.
Replacement Parts
ALL80526 ALL80527
Chevy Mini-Starter
ALL80520
Description
Starter Solenoid Bolts And Shims
Chevy Mini-Starter ALL80515
3HP high-torque gear reduc-
tion, block mount Chevy mini starter. In-line Mounting bolts and shim kit included.
GM LS Mini-Starter NEW!
ALL80521
The block-mounted GM LS gear
reduction mini-starter works with
starting performance over OE-style starters.
A 3-position mounting block allows the starter motor frame obstructions. The high-torque 3 HP motor and a 3.75:1 gear reduction is ideal for engines with up to 11:1 compression ratio.
Part No. Description
Replacement Parts
ALL80521 Starter Solenoid
Universal Heat Wrap
ALL34238
Heat-resistant material measures
starter motors, or other components that are close to
one side to protect against radiant heat and includes two
Part No.
ALL81220 ALL81216 ALL81221 ALL81218 ALL81246 ALL81248 ALL81250
Description
Chevrolet V8*
Chevrolet V8* w/Vacuum Advance Chevrolet V8* w/Adjustable Collar Chevrolet V8* w/Adjustable Collar, Dual Pick-Up Ford V8 221-302
Ford V8 351W
Ford V8 351C, 400C/M, 429-460
Part No.
ALL76208 ALL76209
Description
Jumper Wire With Spade Terminal Jumper Wire With Ring Terminal
It’s smaller, lighter and offers
several mounting options. Perfect
starter for race cars with clearance
problems in the chassis or around
header pipes. Chevy 153- and 168-tooth applications. Starter has 1.4kw permanent magnet, weighs just 9.6 lbs. and includes bolts and shims.
Part No. Description
Replacement Parts
High-Performance Distributors
For Use With Ignition Box
choice for many types of vehicles. Requires an
aluminum with an upper support bearing and
operation and accurate timing at higher RPMs.
and stainless steel contacts, a mechanical curve kit with advance springs and stop bushings, manifold gasket, housing O-rings, spark plug wire retainer cap with screws, and instructions.
ALL80521 ALL80522 ALL80523 ALL80524
Starter Solenoid Starter Drive Assembly Starter Pinion Bolts And Shims
* Excluding 348-409 CID
Note: Distributors include melonized drive gears compatible with most flat
tappet or hydraulic roller camshafts. If used with a mechanical roller camshaft, a bronze or other compatible gear should be used as recommended by cam manufacturer.
Part No. Description
Replacement Parts
ALL81225
ALL81224 ALL81226 ALL81225 ALL81228
Cap And Retainer (Chevrolet) Cap And Retainer (Ford) Rotor
Magnetic Pick-Up
CD Ignition Coil
ALL81230
High-output ignition coil is
capacitive discharge ignition sys-
tems. 40,000 volt coil is recommended
for use with Allstar Performance HP series distributors. mounting. Mounting hardware, anti-vibration mounting pads, ring terminals, and high-temperature silicone boot are included.
2021 HOT ROD AND EARLY MUSCLE
49
