Page 60 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 60
Ludwig Clamps
ALL18232
other items. Sold in packs of four.
Tie Wraps
Secure electrical wiring, gauge lines, and roll bar pad-
natural, red, blue, yellow, and purple nylon.
Caliper Fittings
Commonly used in stock-type calipers in place of the
Part No.
Black
ALL14120
ALL14122
ALL14123
ALL14124
ALL14125
Natural
ALL14130
ALL14132
ALL14133
ALL14134
ALL14135
Length Part No. Length
Red
3-3/4" ALL14126 7-1/4"
6" ALL14127 14-1/4"
7-1/4" Blue
11-1/4" ALL14128 7-1/4"
14-1/4" ALL14129 14-1/4"
Yellow
3-3/4" ALL14136 7-1/4"
6" ALL14137 14-1/4"
7-1/4" Purple
11-1/4" ALL14138 7-1/4"
14-1/4" ALL14139 14-1/4"
ALL50029 ALL50030 ALL50036
ALL50029 ALL50030 ALL50032 ALL50035 ALL50037 ALL50036 ALL50040
ALL50032
ALL50035
ALL50040
Part No.
Description
3/8"-24 To -3AN Straight
3/8"-24 To -4AN Straight 7/16"-20 To -4AN Straight 7/16"-20 To -4AN 90 Deg. 10mm – 1.50 To -3AN Straight 10mm – 1.50 To -4AN Straight 10mm – 1.50 To Female 1/8"-27NPT
NPT To AN Fittings
connecting braided lines to brake calipers, engine oiling systems, etc.
Bleeder Fitting With Screw
ALL50180
ALL50000 ALL50001
ALL50010 ALL50011
ALL50018 ALL50019
ALL50020
ALL50021
ALL50199 ALL50200
Banjo Fittings
banjo bolts and crush washers in stock- type calipers to allow direct connection of a steel braided line and allow pivoting the line as needed. Fittings are sold in a
ALL50063
ALL50066
Part No.
Description
ALL50000
ALL50001
ALL50010
ALL50011
ALL50018
ALL50019
ALL50020
ALL50021
ALL50199
ALL50200
1/8"NPT Male To -3AN Straight, 2-Pack
1/8"NPT Male To -4AN Straight, 2-Pack
1/8"NPT Male To -3AN 45 Deg.
1/8"NPT Male To -4AN 45 Deg.
1/8"NPT Male To -3AN 90 Deg.
1/8"NPT Male To -4AN 90 Deg.
1/8"NPT Male To -3AN 90 Deg. Tall
1/8"NPT Male To -4AN 90 Deg. Tall
1/8"NPT Female To -3AN
1/8"NPT Female To -4AN
Part No.
ALL50060 ALL50061 ALL50062 ALL50063 ALL50067 ALL50068 ALL50066
Description
3/8" To -3AN
3/8" To -4AN 7/16" To -3AN 7/16" To -4AN 10mm To -3AN 10mm To -4AN 10mm To -4AN Extended
NPT Fittings
Banjo Bolts
Banjo bolts are a drilled bolt to allow
washers in stock-type calipers to allow the line to pivot as
applications.
Part No.
ALL50070 ALL50072 ALL50076 ALL50077
Description
3/8"-24 7/16"-20 10mm-1.25 10mm-1.50
ALL50182
Part No.
ALL50185
ALL50184
ALL50139
Description
ALL50138
Crush Washers
Crush washers are used when sealing
metal- to-metal contact points of banjo
to the irregularities of the sealing surfaces. Washers are sold in a pack of 10.
ALL50182 ALL50184 ALL50185 ALL50138 ALL50139
1/8"NPT Plug, 4-Pack 1/8"NPT Male Union, 4-Pack 1/8"NPT Female Union, 4-Pack 1/8"NPT Tee, 2-Pack 1/8"NPT Tee, 2-Pack
Part No.
ALL50082 ALL50080
Description
3/8" And 10mm 7/16"
58
2021 HOT ROD AND EARLY MUSCLE
