Page 69 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 69
Ring And Pinion Installation Kits
BEARING KITS INCLUDE*
• Pinion And Side (Carrier) Bearings • Pinion Seal
• Pinion Depth Shims
• Adjustable Side (Carrier) Shims
• Crush Sleeve or Solid Spacer
• Pinion Nut
SHIM KITS INCLUDE* • Pinion Seal
• Pinion Depth Shims
• Adjustable Side (Carrier) Shims, Two (If Applicable)
• Crush Sleeve or Solid Spacer
• Pinion Nut
• One-Ounce Tube of Silicone or Gasket • Gear Marking Compound
• Ring Gear Bolts
* Kit components shown for reference only, specific components will vary depending on application.
Bearing Kit Part No.
Shim Kit Part No.
Carrier Type
Application
General Motors
ALL68515 —
— ALL68521 ALL68518 ALL68519
Chrysler
ALL68532 ALL68531 ALL68537
ALL68615 ALL68616 ALL68622 ALL68621 ALL68618 ALL68619
ALL68631 ALL68631 ALL68637
10-Bolt 7.5", Passenger & Light Truck S-10 1982-1998 10-Bolt 7.5", Passenger, Except Monza 1977-1981
10-Bolt 8.2", Chevy Passenger And G-10 Van, 30-Spline Pinion 10-Bolt 8.5", 30-Spline Pinion, Passenger & Light Truck 12-Bolt 8.875", Chevy & GMC Truck & Blazer, 1.438" Pinion 12-Bolt 8.875", Chevy Hi-Performance Passenger Axle, 1.625" Pinion
8-3/4" 489 Casting With 2.000" I.D. Carrier Bearings (Large #9 On Side Of Casting) 8-3/4" 489 Casting With 1.796" I.D. Carrier Bearings (Large #9 On Side Of Casting) 8-3/4" 742 Casting With 1.796" I.D. Carrier Bearings (Large #2 On Side Of Casting)
8" “Pig” Type, 25-Spline Pinion
8.8" Salisbury Type With 10-Bolt Cover, 30-Spline Pinion
9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
9" 3.250" Carrier Bearing, MW or Strange 28-Spline Pinion Support, No Spacer Or Crush Sleeve 9" 3.250" Carrier Bearing, MW or Strange 35-Spline Pinion Support, No Spacer Or Crush Sleeve
Ford Motor Company
— ALL68513 ALL68510 ALL68511 ALL68509 ALL68512 ALL68539 ALL68538 ALL68543 ALL68542 ALL68540 ALL68541
Dana
ALL68534
ALL68639 ALL68613 ALL68610 ALL68611 ALL68610 ALL68611 ALL68610 ALL68611 ALL68610 ALL68611 —
—
——
Model 60 And 61/1966-98
Ring And Pinion Gear Sets
GM 7.5"
GM 8.5"
Part No.
ALL70110* ALL70112* ALL70113** ALL70114*
Ratio
3.23
3.42
3.42
3.73
Part No. Ratio
ALL70115** 3.73 ALL70116* 4.10 ALL70117** 4.10 ALL70118* 4.56
Part No.
Ratio Part No. Ratio
3.08 ALL70126 4.11 3.42 ALL70128 4.56
ALL70120
ALL70122
ALL70124 3.73
* Set includes standard width ring gear for use with 3.23 and numerically higher ratio carriers or when using 3.08 and numerically lower ratio carriers and ALL70100 spacer.
** Set includes thick ring gear for use with 3.08 and numerically lower ratio carriers.
GM 7.5" Ring Gear Spacer
ALL70100
-
-
FORD 9"
Part No.
ALL70010 ALL70012 ALL70014 ALL70016 ALL70018 ALL70020 ALL70022 ALL70024 ALL70026
Ratio Part No. Ratio
3.50 ALL70028 5.14 3.70 ALL70030 5.29 3.89 ALL70032 5.43 4.11 ALL70034 5.67 4.30 ALL70036 5.83 4.56 ALL70038 6.00 4.71 ALL70040 6.20 4.86 ALL70042 6.33 5.00 ALL70044 6.50
2021 HOT ROD AND EARLY MUSCLE
67
