Page 91 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 91
Lower Springs For 1964-72 A-Body BMR springs are
-
signed to provide
optimal handling
-
ing ride quality.
The front springs
are progressive
wound to provide
variable rates. The
soft portion of the progressive winding maintains near OE ride quality during normal driving conditions. When the suspension is loaded during aggressive cornering, the springs enter into the stiffer portion of the spring. Designed additional spring rate into this portion of
the spring for better control and reduced body roll. All springs are red.
Subframe Connectors
For 1967-69 F-Body
BMRSFC005H
Increases chassis rigid-
ity by tying the front
and rear subframes
together. The bolt-in
design installs by simply
drilling holes, ship with
BMR’s popular Delrin solid front subframe mounts. Black.
Lower Control Arms
For 1982-92 F-Body Eliminate wheelhop and
improve traction with BMR’s lower control arms. Comes with high-durometer poly- urethane bushings.
BMRSP013R
Part No.
BMRSP013R BMRSP014R BMRSP015R BMRSP031R BMRSP033R BMRSP034R
Description
Front, 1" Drop, 1964-72 Rear, 1" Drop, 1964-72 Rear, 2" Drop, 1964-72 Set Of 4, 2" Drop, 1967-72 Set Of 4, 2" Drop, 1964-66 Front, 2" Drop, 1964-72
BMRTCA001H
BMRTCA001R
DOM, Non-Adjustable, Poly Bushings, Black
DOM, Non-Adjustable, Poly Bushings, Red
Part No.
Description
Torque Arms For 1982-92 F-Body
Panhard Rods For
1982-92 F-Body The pan-
hard rod
is respon-
sible for locating the rear end side-to-side in the chassis. Factory F-Body panhard rods are made from stamped- U-shaped material and utilize soft, rubber bushings that from large diameter 1-1/4", heavy wall DOM tubing and utilize either greasable polyurethane bushings or HD spherical bearings by Viking. The adjustable versions
use left-hand and right-hand thread to allow easy on-car adjustment. CNC-machined adjusters are made from 4130 chrome-moly and have rolled threads. All rod end spacers are 304 stainless. The panhard relocation kit replaces the upper panhard rod support and relocates the panhard rod, allowing room for up to dual 3" exhaust routing over the axle.
steel torque arm with a BMR tubular version and put
that power where
it is supposed to
BMRTA002R
DOM, Adjustable, Bolt-in, Red
DOM, Non-Adjustable, Bolt-in, Red
be - the pave-
ment! Bolts di-
rectly in place of
factory torque arm using all factory mounting locations. Requires no welding or drilling and clears all factory or aftermarket exhausts. Both versions come with a new,
Part No.
Description
BMRTA001R
BMRTA002R
Part No.
Description
BMRPHR002R
BMRPHR004H
DOM, On-Car Adjustable. Polyrethane Bushings, Red
Relocation Kit, Black
Lowering System Components
Bell Tech’s lowering system components will improve the looks,
stance, and handling of any car. Bell Tech has kits available to lower just the rear so the car sits level, or full front and rear kits. All Bell Tech kits include all hardware and complete instructions.
CALL FOR APPLICATIONS
2021 HOT ROD AND EARLY MUSCLE
89
