Page 243 - 2020-2021 Catalogue

MARINE INSTRUMENTS
860 - 33701
860 - 33705
860 -13709
860 - 33750
CHESAPEAKE SS BLACKTM Design Features: Perimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, contoured white pointer,
domed glass lens.
INSTRUMENT DIAL RANGE DESCRIPTION SENDER SIZE ORDER NO.
Tachometer 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines. Not Required 4" 860-33710 7000 RPM Universal for all outboard engines (4,6,8,10,12, & 20 pole) Not Required 4" 860-33718
Tach / Hourmeter 6000 RPM For all 4, 6, & 8 cylinder inboard gas engines. Not Required 4" 860-33732
Tach + System CheckTM 7000 RPM Operator Warning System for ‘96 & newer electric start OMC System 4" 860-33750 Operator Warning System Indicator OMC gas outboards (Johnson & Evinrude) CheckTM
Speedometer 60 MPH 10 - 60 MPH qRequires pitot 4" 860-33704 q tube or connection to lower drive unit
GPS Speedometer 60 MPH 10 - 60 MPH (GPS) (Studded) Not Requiredq 4" 860-33749 80 MPH 10 - 80 MPH (GPS) (LCD) Not Required 4" 860-33730
Pitot Kit Universal speedometer pickup tube kit with hardware 860-91109 Same as above with 20 feet of tubing. 860-91106
Ammeter 60 - 0 - 60 Indicates electrical charge / discharge rate Not Required 2" 860-13736
Fuel Level Gauge E - 1/2 - F American 2" 860-13701
Oil Pressure Gauge 80 PSI American 2" 860-13702
Rudder Angle Indicator Port -Starboard Indicates relative position of rudder
860-90530 2" 860-13725 860-90531
Single -
Trim Gauge Up - Down Mercury & Mariner outboards, Mercruiser, Volvo DP, Dual - Yamaha 2001 & newer 2" 860-13707
Johnson / Evinrude, Suzuki outboards2" Requires 2" 860-13709 sending unit
on outboard
Voltmeter 10 -16 Volt For all 12 volt electrical systems NorotstReernqudireivde 2" 860-13705
Water Pressure Gauge Kit 30 PSI All water cooled outboard & I/O engines Not Required 2" 860-13712
Water Temperature Gauge 100 - 250o F American 2" 860-13704
Transferable Limited Lifetime Warranty
Gauge Specifications Sending Unit Information Mounting Information
12 volt, negative ground, internally illuminated unless otherwise noted. American requires standard American or standard Faria sending unit. 4” tachometers, speedometers, synchronizers, & compasses - Hole Size: 3.375” / 85mm. All 2” instruments - Hole Size: 2.0625” /53mm.
For more information see www.fariabeede.com
217