Page 1013 - C.C.Marine Parts & Accessories Catalogue

3MTM SCOTCH-BRITETM HEAVY DUTY PAD - TAN A non-woven, three-dimensional product to be used on the following applications; varnish stripping, bottom paint scuffing and stripping, rust removal and heavy clean-up. ORDER NO. 601-07440 Size: 6" x 9"
3MTM SCOTCH-BRITETM LIGHT DUTY PAD - WHITE For light scouring, including rust removal. Conformable so hard-to-reach, contoured surfaces are easy to reach. Open web construction makes pads easily cleaned for repeated work. ORDER NO. 601-07445 Size: 6" x 9"
3MTM SCOTCH-BRITETM GENERAL PURPOSE PAD - MAROON For scuffing before applying paint and paint primers. Also may be used in cleaning upholstery and chrome. Can be rinsed and used over and over again. ORDER NO. 601-07447 Size: 6" x 9"
3MTM SCOTCH-BRITETM ULTRA FINE PAD - GREY Used to finish sand scratches after using 3MTM WetordryTM abrasives in the 360A grit range. Reusable. ORDER NO. 601-07448 Size: 6" x 9"
3MTM TACK PAD
Based on 3M’s non-woven technology, the tack pad’s three-dimensional web absorbs dust particles and has good conformability, excellent dust collection and reduces adhesive transfer. It is designed to work with all modern paint systems, including water-based paints. ORDER NO. 600-07910 Size: 6" x 9" 10/Pk
3MTM NO. 20 WETORDRYTM SPONGE PAD
A firm hand sanding pad to be used with a three-fold wrap of 3MTM WetordryTM Tri-M-iteTM Paper Sheets, 3MTM ImperialTM WetordryTM Color Sanding Paper Sheets or 3MTM ProductionTM Gold Paper Sheets to make hand sanding easier and more efficient. ORDER NO. 601-05526
3MTM SANDING BLOCK
A pliable rubber block which holds the sandpaper securely during wet or dry sanding operations. It utilizes a 9" x 11" sheet torn or folded into fourths to make 2-3/4" x 9" sheets or for convenience use 3MTM pre-cut 2-3/4" x 9" sheets. ORDER NO. 601-05519 Sheet Size: 2-3/4" x 9"
3MTM HOOKITTM SANDING BLOCK - DUST FREE
Used for sanding applications. Attaches to vacuum hose for dust removal. ORDER NO. 600-05216 Mfr. No. 05216 Size: 9" x 4-1/2"
3MTM HOOKITTM SANDING HAND BLOCK
3MTM HookitTM Hand Blocks are made from a sturdy, durable, high-strength plastic with an easy release hook face. Use with 3MTM HookitTM Abrasives Sheets 2-3/4 inch x 5 inch for leveling of repair areas to produce a true, flat surface. Comfortably fits in hand. ORDER NO. 600-05740 Mfr. No. 05740 Size: 2-3/4" x 5"
3MTM HOOKITTM SANDING BLOCK KIT
Foam HookitTM Sanding Block Kit contains the top seven most popular blocks in a blister pack shipper
Helps make sanding easier in difficult locations. Use as an accessory item with the HookitTM abrasive products for sanding filler, primer and other substrates. Use with 3M Purple Clean Sand Sheet Roll. Kit contains (1) each of 3M#’s 05685, 05686, 05687, 05689, 05691, & (2) of 05691. Blocks are semi-rigid. ORDER NO. 600-05684 Mfr. No. 05684
For more information see: www.3m.com/marine
3 M
R AY
G U
C E
O R
SCO T
S S
CH
TM
S P
-B
R
IT
E
PA
D
S
N
&
A C
/S
AN
D
I
N
G
B
S S
L
O
IE
C
K
979