Page 1217 - C.C.Marine Parts & Accessories Catalogue

INTEGRAL TRIM AND TILT – MODEL 25
The Integral Trim and Tilt Model 25 is made to provide trim and tilt features on motors that don't have factory trim and tilt.
• Designed to work with Johnson and Evinrude Two-Stroke outboards. • Motors made from 1976 to 2004. • Horse Power Ratings of 20, 25, 28, 30 and 35. • Locking Shallow Water Drive (Flip Switch) must be on the side of the motor not the front. ORDER NO. 934-00025 Mfr. No. 55-0025
Relay Control Only (ORDER NO. 934-55022)
TRIM AND TILT - MODEL 135
For outboards up to 135hp or 350 pounds, the Heavy Duty Trim & Tilt maximizes lifting power (even greater than the outboard's tilt range). It also allows for increased tuck-under to get heavy boats on plane quickly.
ORDER NO. 934-00135
Mfr. No. 55-0135
AUXILIARY MOTOR LIFT - MODEL 35 - 13" SETBACK Kicker motors are supported in any position with this durable design. In addition to its ruggedness, the Model 35 is the only kicker motor lift with a convertible setback. It can be adjusted from 7 to 13 inches of setback, making it ideal for inboards
TRIM AND TILT - MODEL 40
The Model 40 is a heavy duty fabricated aluminum bracket. It will hold 2 and 4 stroke motors up to 150lbs. 8” setback - weighs 21lbs.
ORDER NO. 934-55040
Mfr. No. 55-0040
TRIM AND TILT - MODEL 55
Perfectly designed for pontoons, fishing, or pleasure boats, the Trim & Tilt provides an additional five degrees of negative tuck for improved hole shot. Adapts to clamp on or bolt-through outboards.
Standard BIA bolt pattern.
ORDER NO. 934-00055
Mfr. No. 55-0055
PRO STRAP KICKER TIE DOWN
The Panther Pro-Strap provides hands-free, heavy duty retention for the Model 35.
ORDER NO. 935-51500
Mfr. No. 55-1500
ORDER NO. 934-00035
Mfr. No. 55-0035
Product Features
Model 40 Model 55 Model 135 Model 35 Trim & Tilt Trim & Tilt Trim & Tilt Remote Auxiliary Motor Lift
FOR USE WITH TYPE OF OUTBOARD MOTOR
Bolt or Clamp-on
Bolt or Clamp-on
Bolt or Clamp-on
MAXIMUM HORSE POWER RATING
Up to 40 HP
Up to 55 HP
Up to 135 HP
MAXIMUM RECOMMENDED MOTOR WEIGHT
150 lbs (55 kg)
250 lbs (115 kg)
350 lbs (160 kg)
LIFT RANGE
30˚ 60˚ Tilt Only
5˚Tuck, 60˚Tilt
5˚ Tuck, 60˚Tilt
DIMENSIONS: TOP WIDTH
BOTTOM WIDTH TRANSOM HEIGHT TRANSOM SET BACK
10.5" (26.6 cm) 10.5" (26.6 cm) 12" (30 cm) 7" (18 cm)
15" (38 cm) 10" (25 cm) 12" (30 cm) 7" (18 cm)
15" (38 cm) 10" (25 cm) 14" (36 cm) 7" (18 cm)
ELECTRICAL REQUIREMENTS
12 VDC
12 VDC
12 VDC
TYPICAL & MAXIMUM AMP DRAW
5 to 20 Amps
5 to 20 Amps
5 to 20 Amps
Relay Control ORDER NO.
934-55022
934-55022
ORDER NO.
934-55040
934-00055
934-00135
Clamp-on Only
Up to 40 HP
150 lbs (55 kg)
30˚ - 60˚ Tilt Only
11" (18 cm) 10" (18 cm) 11" (18 cm) 7.5" to 13" (18.4 to 39 cm)
12 VDC
5 to 20 Amps
934-55022
934-00035
For more information see: www.panthermarineproducts.com
TRIM AND TILT & ACCESSORIES
1183