Page 1350 - C.C.Marine Parts & Accessories Catalogue

SHRINKWRAP VENTS
STICK-ON VENTS
Easy to install, self adhesive vents, allow your boat to breathe while giving the finished job a professional look. Don’t give mildew a chance to start.
110-00488
110-47550
110-00788
ORDER NO.
110-00488
110-00788
110-47550
Mfr. No.
DS-062A
DS-LOUVER
PAB-475A
Description
Round Airlette vent (Each)
Round louver vent (Each)
Rectangular screen vent (Each)
WEATHER-TIGHT FILTER VENT
WEATHER-TIGHT VENT
Allows more air circulation under shrink wrap covers and is water resistant when installed horizontally or vertically. • Easy installation using the one-piece pull tab that exposes over 15 square inches of adhesive
• Permanent attachment using optional clips • UV additives for long life in all climates
ORDER NO. 110-00688 Mfr. No. DS-683 (Each)
LIGHTNING VENT
• Provides airflow under shrink wrap to keep covered products moisture free
• Improves upon a tested vent design • Large hood over vent opening for better weather protection • Easy one-hand installation with self-piercing design • Works for both storage & transportation covers • Inexpensive protection Secure with tape after piercing. ORDER NO. 231-11460 (Each) Mfr. No. DS-LIGHTNING
For more information see: www.dr-shrink.com
SEAT SAVER
• Protects vinyl seat backs from being indented by support structure strapping • Fits on all 1.25" square tubing top rails on pontoon boats • Prevents damage to seat backs from strapping abrasion and heat damage by
lifting shrink wrap off the seat backs during the shrinking process • Provides either a 2" or 4" lift of the strapping over the vinyl seat backs.
This product is reversible with strapping receivers at both ends of the product
• Uses a filter pad inside the vent top to keep dust, bugs, dirt & other debris out of shrink wrapped products
• Identical to the standard DS-683 Weather-Tight Vent, the DS-683F Filter Vent is easy to install, inexpensive, versatile, has a replacement filter, and works in any
climate • Complete with the filter vent pre-installed
ORDER NO. 110-00688-1 Mfr. No. DS-683F (Each)
POLYFOAM VENT
Polyfoam Vent. 19" x 3" x 2" Thick. Don’t give mildew a chance to start. ORDER NO. 110-00486 (Each)
ORDER NO. 231-11477
Mfr. No. DS-SEATSAVER (Each)
BOAT VENT II
Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles. Sold Individually.
ORDER NO. 101-11982 Mfr. No. 11982 For more information see: www.taylormadeproducts.com
1316