Page 246 - C.C.Marine Parts & Accessories Catalogue
P. 246

MARINE INSTRUMENTS
860 - 32832
860 - 32810
860 - 32805
860 -12828
EURO BLACKTM
Design Features:
Perimeter-lighted black dial with bold white graphics, flat glass lens, black aluminum bezel, contoured white pointer.
INSTRUMENT	DIAL RANGE	DESCRIPTION	SENDER	SIZE ORDER NO.
Tachometer	6000 RPM	For all 4, 6, & 8 cylinder inboard & I/O gas engines.	Not Required	4"	860-32804 7000 RPM	Universal for all outboard engines (4,6,8,10,12, & 20 pole)	Not Required	4"	860-32805
Tach / Hourmeter	6000 RPM	For all 4, 6, & 8 cylinder inboard gas engines.	Not Required	4"	860-32832 Integral Electonic LCD Hourmeter	7000 RPM	Universal for gas outboard engines (4,6,8,10,12, & 20 pole)	Not Required	4"	860-32840
Tach + System CheckTM	7000 RPM	Operator Warning System for ‘96 & newer electric start	OMC System	4"	860-32850 Operator Warning System Indicator	OMC gas outboards ( Johnson & Evinrude )	CheckTM
55 MPH	10 - 55 MPH 80 MPH	10 - 80 MPH
Requires pitot	860-32810 tube or connection	860-32812 to lower drive unit
Pitot Kit	Universal speedometer pickup tube kit with hardware Same as above with 20 feet of tubing
860-91109 860-91106
Ammeter	60 - 0 - 60	Indicates electrical charge / discharge rate	Not Required	2"	860-12822
Clock	Quartz analog	Not Required	2"	860-12825
Cylinder Head Temperature	60 - 220o F	All water cooled outboard motors	Included	2"	860-12819 Gauge Kit
Fuel Level Gauge	E - 1/2 - F	American	2"	860-12801
Oil Pressure Gauge	80 PSI	American	2"	860-12803
Rudder Angle Indicator	Port -Starboard Indicates relative position of rudder	Single - 860-90530	2"	860-12833 Dual -	860-90531
Tank Level Gauge	E - 1/2 - F	Potable water level	American	2"	860-12830
Trim Gauge	Up - Down	Mercury & Mariner outboards, Mercruiser, Volvo DP,	Requires	2"	860-12828 Yamaha 2001 & newer	sending unit	2"	860-12827
on outboard or stern drive
Voltmeter	10 -16 Volt	For all 12 volt electrical systems	Not Required	2"	860-12821
Water Pressure Gauge Kit	30 PSI	All water cooled outboard & I/O engines	Not Required	2"	860-12810 60 PSI	All water cooled outboard & I/O engines	Not Required	2"	860-12875
Water Temperature Gauge	100 - 250o F	American	2"	860-12812
Gauge Specifications Sending Unit Information Mounting Information
12 volt, negative ground, internally illuminated unless otherwise noted. American requires standard American or standard Faria sending unit. 4” tachometers, speedometers, synchronizers, & compasses - Hole Size: 3.375” / 85mm. All 2” instruments - Hole Size: 2.0625” /53mm.
Transferable Limited Lifetime Warranty
For more information see www.fariabeede.com
212


































































































   244   245   246   247   248