Page 729 - C.C.Marine Parts & Accessories Catalogue

TURBO IN-LINE BLOWERS
Improved 3" design includes:
• Nickel-plated motor can for corrosion resistance • Stiffening ribs to reduce housing distortion • Motor cap to seal wires and motor for water resistance • Up to 25% higher airflow • Up to 40% fewer amps • NMMA Certified • IMCI (CE) Certified
Attwood's new and improved Turbo 4000 sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation and prevents blade to housing interference.
ORDER NO. Mfr. No.
For 3" I.D. Ventilation Hose
101-17310 1731-4
101-17330 1733-4
For 4" I.D. Ventilation Hose
Description
Turbo 3000 Standard 12V
Turbo 3000 Water Resistant 12V
Turbo 4000 Standard 12V 101-17310
Turbo 4000 Water Resistant 12V
3" AND 4" IN-LINE BLOWERS
• Efficient high volume air flow • Quiet operation • Low amp draw • Slip-on inlet and outlet ducting connections • Sealed motor shaft for moisture protection • Corrosion resistant nickel plated motor housing
New & Improved
Water Resistant
101-17470
101-17490
1747-4
1749-4
101-17470
For more information see: www.attwoodmarine.com
• ABYC-H2 • ISO 9097:8846 • IMCI (CE) • N.M.M.A. type accepted • USCG 183.410 Compliant,
Ignition protected
For more information see: www.xylem.com
For more information see: www.sea-dog.com
ORDER NO.
272-14000
272-24000
Mfr. No.
140
240
Fastener
1/4" Bolt
Description
3” In-Line Blower
4” In-Line Blower
BILGE BLOWER - 12 Volt
Injection Molded ABS Housing
ORDER NO. 424-35210
Mfr. No. Amps A
435210 3 @ 12 V 3”
IN-LINE BLOWERS
CFM
100
DETMAR blowers are reliable, efficient and have the highest capacity on the market. • UL 1128 • ABYC H-2 • NMMA Certified
• U.S.C.G. 33 CFR sections 183.410, 183.425 and 183.610 • IMCI Certified in accordance with ISO 9097
107-07510
107-07540
LISTED
ORDER NO. Mfr. No.
107-07540 7-5-4C
107-07510 7-5-1C
107-07580 7-5-8C
Description
3” In-Line Blower (3” intake, 3” exhaust)
4” In-Line Blower (4” intake, 4” exhaust)
4” intake, 3” exhaust In-Line Blower
For more information see: www.detmarcorp.com
3" AND 4" IN-LINE BLOWERS
• 12 Volt • High capacity at low amp draw • Quiet, highly efficient & reliable operation • High quality ABS plastic construction • Installs easily with mounting feet & slide-on hose connection • ABYC H-2 • NMMA Certified • U.S.C.G. 33 CFR Sections 183.410, 183.425 & 183.610
ORDER NO.
671-66302
671-66402
Mfr. No.
66302
66402
Size
3” In-Line
4” In-Line
Capacity
158 CFM
240 CFM
For more information see: www.spxflow.com/johnson-pump-marine
BILGE BLOWERS
695